Selasa, 31 Mei 2011

BMW K1300R, 2009

BMW K1300R, 2009


Detail Value:
New price: £9,500
Engine size: 1293cc
Power: 173bhp
Top speed: 155mph
 MCN overall verdict rating is 4
It may look largely the same as the outgoing model but the latest version of BMW’s naked K1300R has had a host of small changes that add up to a much better bike all-round. With a claimed 173bhp and some seriously clever optional electronically-adjustable suspension, traction control and a long list of options to choose from, BMW has built a bike that almost defies naked bike logic. And don’t forget the new K-series range now has proper indicators rather than the confusing triple switches of old.

Engine
The motor is the biggest single area of improvement over the previous model. Engineering development was handed over to the spanner magicians at Ricardo – the same firm that designed the gearbox for the 1000bhp Bugatti Veyron hypercar. This is the first time BMW has worked with Ricardo on one of its bikes. The result is a claimed 173bhp from an increased 1293cc four-cylinder motor that is much smoother with bundles of power and torque. It’s one of the best big-capacity motors on the road today combining lovely refinement with a racing engine snarl when pushed. And yes, it’s very, very, very fast. The only question is how long you can hang on.

Senin, 30 Mei 2011

Aprilia Tuono 1000 R Factory, 2009

Aprilia Tuono 1000 R Factory 2009
Style
The design On the Tuono 1000, is at the service of performance and comfort. Every little detail has been developed not only to attract admiration for its refined style, but to be totally functional.

The main characteristics of the new V 60 Magnesium Evolution engine:
Optimised cylinder heads with bigger valves and one spark plug per cylinder;
57 mm throttle bodies with one injector per cylinder;
high strength conrods;
minimum weight thanks to the extensive use of magnesium;
close-ratio gearbox;
dry sump lubrication with a double trochoid pump, separate oil tank and oil cooler;
mixed gear and chain valve timing. The drive gears (one for each timing chain) are located inside the crankcase to keep the cylinder heads as compact as possible;
AVDC (Anti Vibration Double Countershaft);
Aprilia's patented PPC (Pneumatic Power Clutch) hydraulically operated, power assisted clutch system for controlling rear wheel bounce under deceleration

Frame
Every aspect of the frame, fork and suspensions has been fine tuned for perfect weight distribution. The frame is a combination of aluminium-silicon alloy castings and Peraluman 450 pressed parts.

Suspension
The fork is a Showa upside down unit, with 43 mm stanchions for a perfect balance between precision on the racetrack and comfort on the road. And to ensure that the ideal setup can be achieved for all styles and conditions, on the road and on the track alike, the fork is fully adjustable in spring preload and in compression and rebound damping.

Braking System
The braking system has undergone a number of major changes. The Tuono 1000 is equipped with Brembo Gold radial calipers featuring two separate sintered pads.
The two 320 mm floating steel discs feature a narrower braking band to minimise inertia and weight and are fixed in place by Aprilia's exclusive six spoke flange.

Components
The dashboard is a mixed (digital-analog) unit. It uses the data received over the CAN line to perform an essential autodiagnostic function for which it incorporates a dedicated memory.

The LED backlighting can be adjusted to three levels of intensity.
The headlight cluster is derived from that of the RSV, and incorporates four light units for perfect night-time visibility.
The new tail light cluster features the innovative design and LED lighting of the RSV.
The ignition key is internally coded, and the ignition block is fitted with an engine immobiliser as standard.


The Engine
V60 Magnesium longitudinal 60° V twin, four stroke. Liquid cooling with three-way pressurised circuit. Double overhead cams, mixed gear/chain timing drive, four valves per cylinder. Patented AVDC anti-vibration double countershaft.

Fuel
95 RON unleaded petrol.
Bore and stroke 97 x 67.5 mm.
Displacement 997.62 cc.
Compression ratio 11.8:1.
Maximum power at the crank 102 kW (139 HP) at 9,500 rpm.
Maximum torque at the crank 10.9 kgm (107 Nm) at 8,500 rpm.
Fuel system Integrated electronic engine management system. Indirect multi-point electronic injection. 57 mm diameter throttle bodies.
10.3 litre airbox with Air Runner ram air scoop.

Ignition
Digital electronic ignition, integrated with the injection control system. One spark plug per cylinder.
Starting Electric starter.

Exhaust system
Two silencers with three way catalytic converter and lambda probe oxygen sensor (Euro 3).
Generator 12 V - 500 W.
Lubrication Dry sump with separate oil reservoir.
Double trochoid pump with oil cooler.
Steel oil reservoir.

Gearbox
6 speed. Transmission ratios:
1st 34/15 (2.27)
2nd 31/19 (1.63)
3rd 26/20 (1.3)
4th 24/22 (1.091)
5th 24/25 (0.96)
6th 23/26 (0.88)
Clutch Multiple disc in oil bath with patented PPC power-assisted hydraulic control.
Metal braid clutch line.
Radial master cylinder.
Primary drive Spur gears. Transmission ratio: 60/31 (1.935:1).

Front suspension
Öhlins Racing 43 mm upside-down fork with adjustment for spring preload, compression and rebound damping. 120 mm wheel travel.
Rear suspension Aluminium alloy double banana swingarm. APS (Aprilia Progressive System) rising rate linkages.
Öhlins Racing hydraulic monoshock with piggy back cylinder, adjustable in spring preload, compression and rebound damping. Wheel travel 133 mm.

Brakes
Front: double floating disc in stainless steel, Ø 320 mm.
Brembo Triple Bridge radial caliper with four 34 mm pistons and four sintered pads.
Metal braided brake line.
Rear: Brembo stainless steel disc, Ø 220 mm. Twin piston calliper, 32 mm diameter pistons, sintered pads. Metal braided brake line.

Wheels
Aluminium alloy.
Front: 3.50 x 17"
Rear: 6.00 x 17".
Tyres Radial tubeless.
Front: 120/70 ZR 17.
Rear: 190/55 ZR 17 (alternatives: 190/50 ZR 17 and 180/55).
Dimensions Maximum length: 2,025 mm
Maximum width: 830 mm (at handlebars)
Maximum height: 1,100 mm (at handlebars)
Seat height: 810 mm
Handlebar height: 1,020 mm at bar ends
Wheelbase: 1,410 mm
Trail: 103.7 mm
Steering angle: 25°
Tank Capacity 18 litres, 4 litre reserve.

Minggu, 29 Mei 2011

Bimota Tesi amilenium2 Small

Bimota Tesi amilenium2 Small




Bimota Tesi amilenium2 Small

Sabtu, 28 Mei 2011

Ducati 848 Nicky Hayden Edition, 2010

Ducati 848 Nicky Hayden Edition, 2010



 



The new Ducati 848 Nicky Hayden Edition enjoys all the performance advancements of the entire Superbike family, while adding its own innovations to redefine the middleweight sport bike class.

The words ‘agile’ and ‘refined’ aptly describe the 848. At 168kg (369lbs) the 848 is an amazing 20kg (44lbs) lighter than its predecessor, and a significant 5kg (11lbs) lighter than its larger capacity brother, the 1098.

The highly advanced 848 engine uses an improved method of engine case production in which cases are vacuum die-cast formed. While providing significant weight savings of more than 3kg (6.5lbs), this method also ensures consistent wall thickness and increased strength. Further refinements include a sophisticated wet clutch that offers 1kg (2.2lbs) less weight, a much higher service life, improved clutch feel and quiet operation.

With the first twist of the wrist, the powerful rush of the Testastretta Evoluzione engine confirms that the rules have changed. The 848’s 134hp is not only 30% more powerful than its predecessor, but it provides a power-to-weight ratio even better than the potent 999.

Several upgrades features in addition to the special Hayden livery and full specifications listed below:
  • LED dash illumination for better visibility – particularly at night
  • Inclusion of a 30mm mirror extension kit, enabling a choice of two stem lengths for better vision
  • Aluminium cam belt tensioner pulleys to reduce weight and moving mass; in turn enabling better acceleration.

Engine
The 848 Testastretta Evoluzione engine becomes the benchmark for the middleweight sportsbike category, benefitting from all the experience accumulated with the larger engine on the 1198. It successfully adopts the same design guidelines and the same compact cylinder and cylinder head layout, but introduces for the first time ever an innovative solution for the crankcase, which has been designed with a further weight reduction for this advanced engine in mind. The overall layout of this engine integrates a series of avant-guard solutions, confirming the close links with the experience of Ducati’s racing department.

The 849cc engine has bore and stroke values of 94mm and 61.2mm respectively, which produce a ratio that is only slightly inferior to the 1098 (1.54 compared with 1.61), while maintaining the highly ‘over-square’ layout typical of racing engines.

Power output is an impressive 134hp (98.5kW) at 10,000 rpm and maximum torque is 71 lb/ft (96Nm) at 8250 rpm. The power and torque values confirm the high performance level of this engine, especially when compared to its predecessor, the Testastretta-engined 749.

The cylinder head has been modified in line with the characteristic bore and stroke of the engine in order to optimize the fluid dynamics of the intake (straight and plunging) and exhaust ducts and combustion chamber. The compression ratio is 12:1.

The valve angle is the same as the 1198 engine and diameter is 39.5mm for the inlet valve and 32mm for the exhaust. The technology used sees the application of a bi-metallic alloy that combines increased lightness with resistance and reliability required for these particular components. The desmodromic control system has also been designed with the weight and the inertia of the new components in mind, allowing extremely efficient valve lift during intake and exhaust phases. The excellent results achieved are confirmed by the engine’s power figures, producing outstanding performance thanks also to the use of MotoGP-derived elliptical throttle bodies, which have been fitted to the 1198 engine. The 2010 model year sees the addition of new lightweight cam belt tensioner pulleys; improving performance while shaving weight.

The design of a dedicated elliptical throttle body for the 848 demonstrates the attention that Borgo Panigale engineers have devoted to the development of the Superbike range. The cross-section is reduced from the 60 sq. mm of the 1098 to 56 sq. mm so as to optimize fluid dynamics at every engine speed. Just like on the 1098, the new cylinder heads benefit from fewer components and include magnesium covers.

This Testastretta Evoluzione engine sees the introduction of a special technology for the construction of the engine crankcase: Vacural casting. This is a forced vacuum die casting method that allows jet characteristics to be improved thanks to the absence of porosity, gas inclusion and oxidation. This allows extremely high measurement precision and greater ductility for aluminium alloy. Designers have been able to harness the benefits of this innovative process by redefining the shape and the wall thickness of the new crankcase by means of FEA (Finite Element Analysis) checks, which allowed the required reliability standards to be achieved, while simultaneously obtaining a significant weight saving of 3.5kg.

The 848 engine is fitted with a silent modular wet clutch, characterized by an exceptional resistance to wear that will lead to superior duration. This solution makes a useful contribution to weight saving, estimated to be around 1.6kg, which is also due to the use of a different type of clutch cover.

The high power figures achieved by this engine also come from the use of the same type of oil cooler and coolant radiator as the 1198’s engine, with an increased surface area assisted by lightweight, high flow electric fan assemblies.

Finally, the 848’s exhaust system follows the same layout and uses the same innovative technology as the 1198. The system terminates with Ducati’s trademark twin under-seat silencers, delivering the unmistakable signature sound of the big bore 90° L-Twin.
This power unit, just like all the other Ducati engines, has been designed to comply with Euro 3 exhaust emission norms.

Chassis


Trellis frame
Developed in cooperation with Ducati Corse, the 848 Trellis frame has a simplified tube layout featuring main section tubes increased in diameter from 28mm to 34mm, while being reduced in thickness from 2mm to 1.5mm. The result is a 14% increase in rigidity and a weight saving of 1.5kg (3.3lbs).

Single-sided swingarm
The 848, as all the Superbike family, is equipped with a unique single-sided swingarm. The engineers were encouraged to re-think the construction technique of this element. The solution was to produce the main operational components using individual aluminium castings so as to ensure strength around the pivot points, wheel hub and suspension links, with fabricated aluminium sections used to complete the construction into a single, beautifully engineered component.

Rear suspension

Highlighting the way in which individual components are influenced by each other, the new lightweight Trellis frame and single-sided swingarm have enabled a more compact and further weight-saving rear suspension linkage system to be used featuring separate lower pick-up points for the push-rod and suspension unit. This ‘tandem’ design effectively reduces stress around the linkage pick-up area of the Trellis frame. Working together with this highly efficient linkage is a fully adjustable Showa single shock for the 848, the same as the 1198.

Front suspension

At the front the 848 is equipped with fully adjustable 43mm Showa forks with radial mounts. This type of front suspension is professionally track-tuned and offers superior road holding, delivers superior feedback, and helps every rider to be more confident and in control.

Control

Brembo Monobloc calipers
The 848 brake system is characterized by M4 calipers using four 32mm pistons and two radial mounted pads. Matched to the calipers are two 320mm discs and the combination of these elements achieves spectacular braking power.

Super lightweight wheels

The 848 also benefits from lightweight Marchesini Y-shaped spoke wheels. The weight saving of 250gr achieved on the front wheel substantially reduces the moment of inertia and enhances the 848’s change of direction and braking performance. The rear wheel is just as impressive with a complete redesign for its single-sided swingarm application that has resulted in a reduction of over 1kg compared with traditional Ducati single-sided swingarm fitments. Finally a 5.50” wheel fitted with a 180/55 tyre guarantees the maximum agility at the rear.

Electronics
Desmosedici-style digital instrumentation is taken from Ducati’s MotoGP GP9 project; and for 2010 now features LED backlighting for better visibility. This pure racing, minimalist solution has no switches or buttons to compromise its clean lines. Instead, information additional to the default read-outs is managed by handlebar-mounted switch gear, allowing the rider to scroll through and select from various menus. The default read-out presents rpm and speed, with the former displayed across the screen in a progressive bar graph. Optionally, the rpm and speed can be displayed in numeric values. The instrument display also doubles as a control panel for the activation of the data acquisition system as well as listing lap times recorded by using the high-beam flash button as a stopwatch.

With the purchase of the Ducati Data Analyser (DDA), which includes PC software, a USB-ready data retrieval card and instructions, owners are ready to review and analyse the performance of the bike and its rider, and make comparisons between various channels of information. The DDA is available from Ducati Performance.

Normally used on race bikes only, the system records numerous channels of data including throttle opening, vehicle speed, engine rpm, engine temperature, distance travelled, laps and lap times. The system also automatically calculates engine rpm and vehicle speed data so as to also display gear selection as an additional channel of information. At the end of a ride or track session, up to 2mb (approximately 3.5 hours) of data can be downloaded to your PC ready to compare, analyse and get an inside view of you and your 848’s performance.

Data can be analysed in graphic form with options to zoom into detail of specific sections. Dragging a trace along a timeline to reveal individual values of the above listed channels enables the user to analyse performance in the same way that data technicians are able to do in factory teams.

Instrumentation
Digital Dashboard that displays derivation MotoGP: speedometer, tachometer, lap time on the stopwatch, clock, air temperature, water temperature, battery voltage, odometer, trip odometer fuel, preventive maintenance indicator. Spies segnalatiche: neutral arrows. projector beam, limiter, oil pressure, fuel level. Other Features: immobilizer, integrated DDA. 

Jumat, 27 Mei 2011

Husqvarna SM450R Specifications, 2009

Husqvarna SM450R Specifications, 2009


Engine
Type Single cylinder, 4-stroke, DOHC, 4 valve
Bore 97 mm
Stroke 60.76 mm
Displacement 449 cc
Compression ratio 12.9 : 1
Starting Electric (with automatic decompressor)
Cooling Liquid-cooled
Radiator 2
Lubrication Dry sump with 2 oil pump rotors and cartridge filter
Ignition Digital C.D.I., with variable advance
Spark plug type NGK CR 8EB
Spark plug gap 0.7 mm
Clutch Wet, multi-plate, hydraulic control
Driving disc number 8
Driven disc number 7

Chassis
Type Steel single tube cradle with steel round tubes
Rear frame in light alloy
Front suspension MARZOCCHI USD telescopic hydraulic fork with advanced axle compression and rebound stroke adjustment
Fork leg diameter 50 mm
Fork travel 250 mm
Rear suspension SACHS Progressive Soft Damp type with single hydraulic shock absorber, spring pre-load adjustment. Compression and rebound adjustment (compression stroke - double adjustment)
Rear wheel travel 290 mm
Front brake 320 mm BREMBO floating disc type with hydraulic control and radial caliper
Rear brake 240 mm BREMBO floating disc type with hydraulic control and floating caliper
Rim front 3.50" x 17", light alloy
Rim rear 4.25" x 17", light alloy
Tyre front 120/70-17" PIRELLI MTR 21 Dragon-EVO
Tyre rear 150/60-17" PIRELLI MTR 22 Dragon-EVO

Transmission
Primary drive Secondary drive
Engine sprocket 23 Z/teeth Trans sprocket 15 Z/teeth
Clutch gear 63 Z/teeth Rear wheel sprocket 42 Z/teeth
Transmission ratio 2.739 Transmission ratio 2.800
Type Constant mesh gear type Chain D.I.D 520 V6
Speed 6
Internal ratios 2.000 (28/14) Overall ratios 15.339/td>
2nd 1.611 (29/18) 2nd 12.356
3rd 1.333 (24/18) 3rd 10.226
4th 1.086 (25/23) 4th 8.336
5th 0.920 (23/25) 5th 7.056
6th 0.814 (22/27) 6th 6.249



Electrical Equipment
Voltage 12 V
Head light 35/35 W
Pilot light 3 W
Tail light 5 W
Stop light 21 W
Turn signal 10 W
Battery 12 V - 6 Ah

Kamis, 26 Mei 2011

Husaberg FE390 Enduro, 2010

Husaberg FE390 Enduro, 2010 

 
Key Features

Upside-down fork
The fully adjustable 48 mm fork from WP Suspension has been further optimised to ensure even more responsive handling and provide high damping reserves. Combined with the increased 22 mm offset (previously 19 mm) of the CNC-machined triple clamps, this guarantees more reliable front wheel control.

Airbox
Positioned directly behind the fuel cap, it is covered by the front section of the seat. The airbox’s elevated position guarantees the intake of cool, clean air and maximum wading depth. The intake duct is in the direct downdraft from the filter to the cylinder.

Tank
The slim, 8.5 litre tank runs far below the seat to provide an optimal centre of gravity and is equipped with both a compact fuel pump and new reserve sensor. The transparent polyethylene also enables the fill level to be determined at a glance.

Exhaust System
The integration of the stainless steel exhaust manifold offers optimum protection from rock damage and keeps the rider from coming into direct contact with it.



Brakes
The latest Brembo front brake with optimised front brake pads for maximum braking performance at minimal effort. Effective single-piston brake caliper in the rear. Ultra-light wave discs for the ultimate braking performance and better self-cleaning of the brakes.

PDS Shock
Fully adjustable WP PDS shock with optimised setting for even more traction. Adjustable rebound damping and variable high and low speed compression damping guarantee the perfect configuration for all conditions.

Frame
The light double-cradle perimeter frame made of chrome-molybdenum. Guarantees the greatest torsional rigidity and secure tracking stability. Extremely slender lower tube loops. Minimal overall width. Unbeatable ground clearance.

Silencer
Especially light and made of highquality aluminium, the silencer assures compliance with all official noise limits.

Subframe
Cross-linked polyethylene (PE) ensures that the plastic construction has the highest stability values and a reduced weight at the same time. Many electric components have been perfectly imbedded in the rear fender.

Rabu, 25 Mei 2011

Polaris Sportsman 800 EFI Touring, 2009

Polaris Sportsman 800 EFI Touring, 2009


Slogging through the fog and slop on Duck Opener. Conquering an endless sea of boulders. Or just coming around the trail’s bend and discovering a place you never knew existed.
The places we ride. The experiences we take away. They’re what shape everything we do at Polaris.

The Engine
  • Engine Type: 4-stroke
  • Displacement, cc: 760 twin
  • Carburetion: 40mm Throttle Body, EFI
  • Cooling: Liquid
  • Starting: Electric
Drive Train
  • Final Drive: Shaft
  • Transmission: P/R/N/L/H
  • Drive System: Automatic PVT, Turf / 2WD/AWD/AWD with ADC
  • Engine-Braking System: Standard
  • Active Descent Control: Standard


Suspension
  • Front Suspension: MacPherson Strut with 8.2" / 20.8 cm travel
  • Rear Suspension: Fully Independent, progressive rate with anti-roll bar; 8.75" / 22.2 cm travel
Brakes
  • Front Brakes: Single-Lever Hydraulic disc
  • Rear Brake: Hydraulic rear foot brake
Tires and Wheels
  • Front Tires: 25 x 8-12; 489
  • Rear Tires: 25 x 11-12; 489
  • Wheels: Cast Aluminum
Dimensions and Capacities
  • Wheelbase: 57" / 144.8 cm
  • Dry Weight: 795 lb. / 360.6 kg
  • Length/Width/Height: 86" / 218.4 cm, 48" / 121.9 cm, 48" / 121.9 cm
  • Seat Height: 34" / 86.4 cm
  • Fuel Capacity: 6 gal / 22.7 ltr
  • Front Rack/Box Capacity: 90 lb. / 40.8 kg
  • Rear Rack Capacity: 180 lb. / 81.6 kg
  • Hitch Towing Capacity: 1,500 lb. / 680.4 kg
  • Ground Clearance: 11" / 27.9 cm
  • Hitch/Type: Std / Receiver
Features
Instrumentation: Digital Gauge, Speedometer, Odometer, Tachometer, Tripmeter, Hour Meter, Clock, Gear Indicator, Fuel Gauge, Hi Temp/Low Batt Lights, DC Outlet.

Selasa, 24 Mei 2011

Harley-Davidson Sportster 883 Custom XL883C, 2009

Harley-Davidson Sportster 883 Custom XL883C 2009


The evolution of the Harley-Davidson hot rod continues as most Sportster models roll into the new year on retuned suspension. Five Sportster models retain the raw, soulful styling that represents the uninhibited essence of motorcycling. Responsive handling, the flat torque delivery and distinctive sound of an American V-Twin engine, and classic styling cues make Harley-Davidson Sportster a motorcycle that just keeps getting better.
When it debuted in 1957, the original Sportster projected a tough and rebellious attitude that was born on the gritty dirt tracks and drag strips of that era. That spirit lingers in every new Sportster model, from the retro-bobber Nightster to the glittering chrome of the long 1200 Custom.
The sportster models are powered by the Electronic Sequential Port Fuel Injection (ESPFI) XL Evolution V-Twin powertrain, rubber-mounted in the frame to reduce vibration and tuned to deliver a flat torque curve for responsive performance. Among the most-affordable Harley-Davidson models, Sportster motorcycles offer a low, comfortable seat, smooth clutch effort, and a durable carbon fiber reinforced final drive belt.
The New Front Fenders: All Sportster models get a new low-profile front fender that hugs the tire for a streamlined, custom look.
Sportster 883 Custom features:
Rubber-mounted XL Evolution 883cc engine
Silver powder-coated engine and with polished rocker boxes
New lighter Silver Solid Disc Cast Aluminum 16-inch rear wheel
Chrome Laced Steel 21-inch front wheel
New recalibrated suspension
New low profile front fender
Chrome low-rise handlebar on pullback riser
One-piece, two-up Sportster Classic seat
Chrome Staggered Shorty Dual exhaust
Low-Profile rear shocks
Forward foot controls
4.5-gallon fuel tank
Optional Smart Security System



The Dimensions
Length 90.30 in. (2293.62 mm)
Overall Width 32.70 in. (830.58 mm)
Overall Height 45.70 in. (1160.78 mm)
Seat Height:
• Laden2 - 26.50 in. (673.10 mm)
• Unladen - 28 in. (711.20 mm)
Ground Clearance 4.40 in. (111.76 mm)
Rake (steering head) 30.1°
Fork Angle 30.1°
Trail 4.70 in. (119.38 mm)
Wheelbase 60.40 in. (1534.16 mm)
Tires (Dunlop® Harley-Davidson Series, blackwall):
• Front – D402F MH90-21 54H
• Rear – D401 150/80B16 71H
Fuel Capacity 4.50 gal. (17.03 L)
(warning light at approximately 1 gal.)
Oil Capacity (w/filter) 2.80 qts. (2.65 L)
Transmission Capacity 1 qts. (0.95 L)

The Weight:
• As Shipped 565 lbs. (256.28 kg)
• In Running Order 591 lbs. (268.07 kg)
• Gross Vehicle Weight Rating 1000 lbs. (453.59 kg)
• Gross Axle Weight Rating
• Front 335 lbs. (151.95 kg)
• Rear 665 lbs. (301.64 kg)

The Engine
Engine3 Air-cooled, Evolution®
Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke 3 in. x 3.81 in. (76.20 mm x 96.77 mm)
Displacement3 53.86 cu. in. (883 cu. cm)
Compression Ratio 8.9:1
Fuel System9 Electronic Sequential Port Fuel Injection
(ESPFI)
Air Cleaner Paper cartridge type
Lubrication System Dry-sump

The Drivetrain
Primary Drive Chain, 57/34 ratio
Final Drive Belt, 68/28 ratio
Clutch 9-plate, wet
Transmission 5-speed
Gear Ratios (overall): U.S. HDI JPN
• 1st 10.782 10.782 10.782
• 2nd 7.702 7.702 7.702
• 3rd 5.728 5.728 5.728
• 4th 4.748 4.748 4.748
• 5th 4.071 4.071 4.071
The Chassis
Frame Mild steel, tubular frame; circularsections; cast junctions
Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Forks 39 mm
Rear Shocks Coil-over; preload dual-adjustable
Wheels4: Chrome, Laced Steel
• Front
21 in. x 2.15 in. (533.40 mm x 54.61 mm)
Silver, Slotted Disc Cast Aluminum
• Rear
16 in. x 3 in. (406.40 mm x 76.20 mm)
Brakes:
• Caliper Type Dual-piston front, single-piston rear
• Rotor Type Patented, uniform expansion rotors
(diameter x width):
• Front 11.50 in. x .20 in. (292.10 mm x 5.08 mm)
• Rear 11.50 in. x .23 in. (292.10 mm x 5.84 mm)

The Suspension Travel:
• Front Wheel 5.69 in. (144.53 mm)
• Rear Wheel 2.12 in. (53.85 mm)

The Performance
Engine Torque5 (per SAE J1349):
• North America 55 ft. lbs. @ 3500 rpm (74.58 NM @ 3500 rpm)
• World 51.29 ft. lbs. @ 3750 rpm (69.55 NM @ 3750 rpm)
• Japan 49.07 ft. lbs. @ 3500 rpm (66.54 NM @ 3500 rpm)

Lean Angle (per SAE J1168):
• Right 29°
• Left 31°

Fuel Economy7
(EPA urban/highway test) 45/60 mpg (5.23/3.92 L/100 km)

The Electric
Battery (per Battery Council International Rating) Sealed, maintenance-free, 12V, 12-amp/hour, 200 cca
Charging Single-phase, 30-amp system (357W @ 13.5V, 2000 rpm, 405W max power @ 13.5V)
Starting 1.2 kW electric with solenoid shift starter motor engagement
Lights (as per country regulation):
• Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam
• Tail/Stop Lights 8W/28W (5W/21W)
• Turn Signal Lights 28W (21W) self-canceling
• Indicator Lamps: High beam, neutral, low oil pressure, turn signals, engine diagnositcs, low fuel warning, low battery, security system6


Senin, 23 Mei 2011

Can-Am Spyder Roadster GS Phantom Black Limited Edition, 2009

Can-Am Spyder Roadster GS Phantom Black Limited Edition
2009




The Spyder GS Phantom Black Limited Edition SM5 roadster.
Phantom Black Body Kit:
Center panel, left and right front fenders, left and right side panels, hood, front facing, rear fender, rear tip.
6-Spoke Custom Wheel Kit
Fog Lights
Seat Skin
Mono Seat Cover
Trunk Liner
Anti Vibe Bar Ends
Front Axle Cap Cover
Front Shock Bolt/Nut Covers
Caliper Trim
Premium Decals
Ultra Sport Windshield
Billets Ends Caps
Billet Rear Axle Covers
Billet Swing Arm Cover

Minggu, 22 Mei 2011

Honda CBR1000RR ABS, 2009

Honda CBR1000RR ABS, 2009

 


The CBR1000RR with Combined Anti-Lock Braking, the most advanced (and first-ever) ABS system to find its way onto an open-class superbike.
The CBR1000RR is the lightest, most compact, and best performing motorcycle in its class, making it the standard against which all other literbikes are measured. And for 2009, it's available with Honda's high-tech electronically controlled Combined ABS for the ultimate in sport bike braking performance.

The New for 2009
- New lightweight turn signals.
- CBR1000RR ABS equipped with patented, electronically controlled Combined ABS, delivering the benefits of Combined Braking System (CBS) and the benefits of Anti-lock Braking System (ABS). (see Technology Section).
- CBR1000RR ABS features higher output ACG with oil jet hole for improved cooling, higher capacity battery and distinctive silver seat rails.
- Exciting new colors: CBR1000RR - Repsol Edition, Pearl White / Light Silver Metallic, Black: CBR1000RR ABS - Red / Black

The Unique Features
- Dual Stage Fuel Injection System (PGM-DSFI) features two injectors per cylinder (see Technology Section).
- Idle-Air Control Valve (IACV) and Ignition Interrupt Control for idle stability and smoother on/off throttle response.
- Low-mount exhaust system design.
- Patented slipper clutch features cam mechanism to reduce clutch-lever pull.
- MotoGP-derived Honda Electronic Steering Damper (HESD) (see Technology Section).
- 43mm Honda Multi-Action System (HMAS) inverted front fork (see Technology Section).
- Exclusive, MotoGP-derived Unit Pro-Link® Rear Suspension (see Technology Section).
- Radial-mount front brake calipers combined with radial-actuated master cylinder.
- Centrally located fuel tank increases mass centralization for a more compact frame design.

The Engine/Drivetrain

- Compact, liquid-cooled DOHC 16-valve 999cc four-stroke inline four-cylinder engine features bore and stroke dimensions of 76mm x 55.1mm.
- Removable cylinder block with Nikasil-coated cylinders.
- Sixteen-valve cylinder head features 30.5mm intake and 24mm exhaust valves with a 12.3:1 compression ratio for efficient combustion and high horsepower.
- Larger titanium intake valves create a lighter valve train and feature double-spring design for optimum performance at high rpm.
- Intake ports use latest shot-peening technology that improves power and torque characteristics.
- Cam-pulser location between the middle cylinders allows a narrower cylinder head and frame.
- Direct shim-under-bucket valve actuation system ensures high-rpm durability and allows 16,000-mile valve maintenance intervals.
- Forged-aluminum thin-domed, high-strength pistons feature molybdenum coating for reduced friction.
- Lightweight nutless connecting rods.
- Iridium-tip spark plugs improve fuel combustion and performance.
- Dual Stage Fuel Injection (DSFI) (see Technology Section).
- 46mm throttle bodies feature Denso injectors with lightweight valving for faster reaction time and 12 holes per injector to optimize mixture atomization, combustion efficiency and power.
- Auto-enriching system is integrated into Programmed Fuel Injection (PGM-FI) module, eliminating the need for a manual choke.
- Idle Air Control Valve (IACV) minimizes torque reaction and smoothes response to small throttle changes through gradual reductions of air and fuel intake when the throttle is opened and closed.
- Ignition Interrupt Control system works with IACV and FI mapping to enhance driveability.
- Smaller and lighter ECU provides two 3-D fuel-injection maps for each cylinder and two 3-D ignition maps for cylinder pairs, creating ideal fuel mixture and spark-advance settings for superb rideability.
- MotoGP-derived twin-tunnel ram-air system allows a high volume of cooler air to the 9.7-liter airbox for linear power delivery and incredible engine performance.
- Butterfly valves inside the ram-air ducts open and close depending on throttle opening and engine rpm for optimum performance.
- Compact, low-mount exhaust system design reduces rear bodywork size and incorporates exhaust valve and catalyst, contributing to significantly improved mass centralization, and reducing roll and yaw inertia.
- High-capacity radiator incorporates twin cooling fans and allows a more compact cowl for reduced drag coefficient.
- Maintenance-free automatic cam-chain tensioner.
- Starter gears located on the right side to produce narrow engine that allows for increased lean angle.
- Patented slipper-clutch design uses a center cam-assist mechanism for easier actuation. Unlike an ordinary slipper clutch where the pressure plate moves from side to side, the Honda clutch moves both the center cam assist and the pressure plate to provide additional slipper effect.
- Nine-plate clutch is compact and tough, featuring durable friction plate material.
- Durable #530 O-ring-sealed drive chain.

The Chassis/Suspension

- Lightweight four-piece Fine Die-Cast twin-spar aluminum frame utilizes latest MotoGP technology (see Technology Section).
- Aluminum subframe is lightweight and easily removed for ease of maintenance.
MotoGP-derived, next-generation Honda Electronic Steering Damper (HESD) (see Technology Section).
- 43mm inverted aluminum-slider Honda Multi-Action System (HMAS) cartridge front fork features spring preload, rebound and compression damping adjustability, and offers precise action and unparalleled rigidity (see Technology Section).
- Exclusive, MotoGP-derived Unit Pro-Link Rear Suspension (see Technology Section).
- Radial-mounted monoblock four-piston front calipers feature chromium-plated aluminum pistons and squeeze lightweight 320mm floating discs in front and a 220mm rear disc with a single-piston caliper for exceptional stopping power.
- CBR1000RR ABS features Honda's electronic Combined ABS. This all-new ECU-controlled, hydraulically actuated system provides accurate braking force distribution to both wheels. ABS is controlled by a hydroelectronic unit and stroke simulator to ensure precise operation. Benefits include consistent lever pressure without the pulsing often associated with ABS systems. Application of rear brake does not result in immediate front brake activation unless lock-up is sensed, allowing an experienced rider to use rear brake in a normal manner during spirited riding. Combined ABS components are smaller and lighter than conventional hydraulic ABS designs, and have been located nearer to the center of the machine, enhancing mass centralization and reducing unsprung weight.
- Super-light aluminum-alloy hollow-spoke wheels feature race-spec 3.5 x 17-inch front and 6.0 x 17-inch rear dimensions.
- Centrally mounted 4.7-gallon fuel tank is positioned low in the frame, increasing mass centralization and allowing a more compact design. This design positions the rider farther forward for optimum handling.

The Additional Features

- Iconic Honda Wing tank badge.
- Lightweight aluminum sidestand.
- Handlebars are repositioned forward for excellent ergonomics.
- High-capacity 400-watt AC generator (non-Combined ABS model).
- High-tech instrument display features tachometer and LCD readouts for speedometer, coolant temperature, odometer, two tripmeters, clock, mpg, average fuel consumption and reserve fuel used.. A low-fuel LED light and shift-indicator light are located above the LCD.
- Line-beam headlight features two-piece reflector design utilizing two H7 bulbs for optimum light distribution and unique compact design.
- LED taillights for lighter weight and improved appearance.
- Front turn signals integrated into folding aerodynamic mirrors.
- Plastic tank shell cover protects tank and airbox.
- Convenient ignition switch/fork lock for added security.
- Convenient push-to-cancel turn-signal switch.
- Maintenance-free high-capacity battery.
- Transferable one-year, unlimited-mileage limited warranty; extended coverage available with a Honda Protection Plan.

The Honda Genuine Accessories

- Color-Matched Passenger Seat Cowl.
- CBR Racing Cycle Cover. (for indoor use)
- Carbon-Fiber Accents.
- Outdoor cycle cover.
- "E - Cushion" seat for greater comfort.

The ENGINE
Engine Type 999cc liquid-cooled inline four-cylinder
Bore and Stroke 76mm x 55.1mm
Induction Dual Stage Fuel Injection (DSFI)
Ignition Computer-controlled digital transistorized with three-dimensional mapping
Compression Ratio 12.3:1
Valve Train DOHC; four valves per cylinder

DRIVE TRAIN
Transmission Close-ratio six-speed
Final Drive #530 O-ring chain

CHASSIS / SUSPENSION / BRAKES

Front Suspension 43mm inverted HMAS cartridge fork with spring-preload rebound and compression-damping adjustability; 4.7 inches travel
Rear Suspension Unit Pro-Link HMAS single shock with spring preload rebound and compression-damping adjustability; 5.4 inches travel
Front Brake Dual radial-mounted four-piston calipers with 320 mm discs
Rear Brake Single 220 mm disc
Front Tire 120/70ZR-17 radial
Rear Tire 190/55ZR-17 radial

DIMENSIONS

Rake (Caster Angle): 23.3°
Trail 96.2mm (3.8 inches)
Wheelbase 55.4 inches
Seat Height 32.3 inches
Curb Weight 461 pounds (Includes all standard equipment, required fluids and full tank of fuel--ready to ride.)
Fuel Capacity 4.7 gallons, including 1.06-gallon reserve
Anti-Lock Braking System

The Engine Type Liquid-cooled inline-four
Displacement 999cc
Bore & Stroke 76mm x 55.1m
Compression Ratio 12.3:1
Valve Train Chain-driven DOHC, four valves per cylinder
Fuel Delivery Dual Stage Fuel Injection (DSFI)
Transmission Close-ratio six-speed
Final Drive O-ring-sealed chain
Front Suspension 43 mm inverted HMAS cartridge fork with full adjustability; 119 mm (4.7 in.) travel
Rear Suspension Unit Pro-Link HMAS single shock with full adjustability; 137 mm (5.4 in.) travel
Tires 120/70ZR-17 radial front; 190/50ZR-17 radial rear
Brakes Front dual 320 mm discs with radial-mounted four-piston calipers; rear single 220 mm disc with single-piston caliper. Electronically controlled Combined ABS
Seat Height 820mm (32.3 inches)
Wheelbase 1,407mm (55.4 inches)
Curb Weight TBA
Fuel Capacity 17.8 litres

Sabtu, 21 Mei 2011

Husqvarna CR125 Specifications, 2009

Husqvarna CR125 Specifications, 2009


Engine
Type Single cylinder, 2-stroke, reed valve and H.T.S. valve with mechanical control on exhaust port
Bore 54 mm
Stroke 54.5 mm
Displacement 124.82 cc
Compression ratio 8.8 : 1
Starting Kick
Cooling Liquid-cooled
Radiator 2
Lubrication Premix 33 : 1
Ignition Electronic C.D.I., analogue type with variable advance
Spark plug type NGK BR 9EG / CHAMPION QN84
Spark plug gap 0.6 mm
Carburetor Mikuni TMX 38
Clutch Wet, multi-plate, mechanic control
Driving disc number 7
Driven disc number 6

Chassis
Type Steel single tube cradle with steel round tubes
Rear frame in light alloy
Front suspension MARZOCCHI USD telescopic hydraulic fork with advanced axle compression and rebound stroke adjustment
Fork leg diameter 50 mm
Fork travel 300 mm
Rear suspension SACHS Progressive Soft Damp type with single hydraulic shock absorber, spring pre-load adjustment, compression and rebound adjustment (compression stroke - double adjustment)
Rear wheel travel 296 mm
Front brake 260 mm BREMBO fixed disc type with hydraulic control and floating caliper
Rear brake 240 mm BREMBO floating disc type with hydraulic control and floating caliper
Rim front 1.60" x 21", light alloy
Rim rear 2.15" x 19", light alloy
Tyre front 80/100-21" PIRELLI 51R-MT 32A
Tyre rear 100/90-19" PIRELLI NHS (57)-MT 32

Timing System
Valve timing - Exhaust 184°
- Transfer 128° 

Jumat, 20 Mei 2011

Harley-Davidson Sportster 1200 Custom XL1200C, 2009

Harley-Davidson Sportster 1200 Custom XL1200C 2009

Dimensions
Length 90.30 in. (2293.62 mm)
Overall Width 32.70 in. (830.58 mm)
Overall Height 45.70 in. (1160.78 mm)

Seat Height:
• Laden2: 26.50 in. (673.10 mm)
• Unladen: 28 in. (711.20 mm)

Ground Clearance 4.40 in. (111.76 mm)
Rake (steering head) 30.1°
Fork Angle 30.1°
Trail 4.70 in. (119.38 mm)
Wheelbase 60.40 in. (1534.16 mm)
Tires (Dunlop Harley-Davidson Series, blackwall):
• Front – D402F MH90-21 54H
• Rear – D401 150/80B16 71H

Fuel Capacity 4.5 gal. (17.03 L) (warning light at approximately 1 gal.)
Oil Capacity (w/filter) 2.80 qts. (2.65 L)
Transmission Capacity 1 qts. (0.95 L)

The Weight:
• As Shipped 562 lbs. (254.92 kg)
• In Running Order 589 lbs. (267.17 kg)
• Gross Vehicle Weight Rating 1000 lbs. (453.59 kg)
• Gross Axle Weight Rating
• Front 335 lbs. (151.95 kg)
• Rear 665 lbs. (301.64 kg)

The Engine
Engine3 Air-cooled, Evolution
Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke 3.50 in. x 3.812 in. (88.90 mm x 96.82 mm)
Displacement3 73.40 cu. in. (1200 cu. cm)
Compression Ratio 9.7:1
Fuel System9 Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner Paper cartridge type
Lubrication System Dry-sump


Drivetrain
Primary Drive Chain, 57/38 ratio
Final Drive Belt, 68/29 ratio
Clutch 9-plate, wet
Transmission 5-speed
Gear Ratios (overall): U.S. HDI JPN
• 1st 9.315 9.004 9.004
• 2nd 6.653 6.432 6.432
• 3rd 4.948 4.783 4.783
• 4th 4.102 3.965 3.965
• 5th 3.517 3.400 3.400

Chassis
Frame Mild steel, tubular frame; circular sections; cast junctions
Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Forks 39 mm
Rear Shocks Coil-over; preload dual-adjustable
Wheels4 (Chrome, Profile Laced Aluminum option):
• Front Chrome, Laced Steel 21 in. x 2.15 in. (533.40 mm x 54.61 mm)
• Rear Chrome, Slotted Disc Cast Aluminum 16 in. x 3 in. (406.40 mm x 76.20 mm)

Brakes:
• Caliper Type Dual-piston front, single-piston rear
• Rotor Type Patented, uniform expansion rotors
(diameter x width):
• Front 11.50 in. x .20 in. (292.10 mm x 5.08 mm)
• Rear 11.50 in. x .23 in. (292.10 mm x 5.84 mm)

Suspension Travel:
• Front Wheel
• Rear Wheel
5.69 in. (144.53 mm)
2.12 in. (53.85 mm)

Lean Angle (per SAE J1168):
• Right 29°
• Left 31°

Fuel Economy7
(EPA urban/highway test) 42/57 mpg (5.60/4.13 L/100 km)

Electric
Battery (per Battery Council International Rating) Sealed, maintenance-free, 12V, 12-amp/hour, 200 cca
Charging Single-phase, 30-amp system (357W @ 13.5V, 2000 rpm, 405W max power @ 13.5V)
Starting 1.2 kW electric with solenoid shift starter motor engagement
Lights (as per country regulation):
• Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam
• Tail/Stop Lights 8W/28W (5W/21W)
• Turn Signal Lights 28W (21W) self-canceling
• Indicator Lamps: High beam, neutral, low oil pressure, turn signals, engine diagnostics, low fuel warning, low battery, security system6


Kamis, 19 Mei 2011

Triumph Bonneville, 2009

Triumph Bonneville, 2009
USA Specifications




Triumph Bonneville, 2009
USA Specifications
MSRP $7,699 USD

Engine
Type
Air-cooled, DOHC, parallel-twin, 360 degree firing interval
Capacity: 865cc
Bore/Stroke: 90 x 68mm
Compression Ratio: 9.2:1
Fuel System: Multipoint sequential electronic fuel injection with SAI



Transmission
Final Drive: X ring chain
Clutch: Wet, multi-plate
Gearbox: 5-speed
Cycle Parts

Frame
Tubular steel cradle
Swingarm
Twin-sided, tubular steel
Front Wheel
Aluminum cast aluminum alloy, 7 spoke, 17x3.0 inch
Rear Wheel
Aluminum cast aluminum alloy, 7 spoke, 17x3.5 inch
Front Tyre: 10/70 17
Rear Tyre: 130/80 17

Front Suspension: 41mm forks
Rear Suspension: Chromed spring twin shocks with adjustable preload
Front Brakes: Single 310mm disc, 2 piston caliper
Rear Brakes: Single 255mm disc, 2 piston caliper

Dimensions
Length: 84.3 in
Width (Handlebars): 29.4 in
Height: 43.3 in
Seat Height: 30.5in
Wheelbase: 57.2 in
Rake/Trail: 27 degree/106mm
Weight (Dry): 440 lbs
Fuel Tank Capacity: 4.2 gal

Performance (Measured at crankshaft to DIN 70020)
Maximum Power: 67bhp at 7,500 rpm
Maximum Torque: 51ft.lbf at 5,800 rpm

Colours: Jet Black and Fusion White
Price: $7,699

Rabu, 18 Mei 2011

Husqvarna SM125, 2009

Husqvarna SM125, 2009



The SM 125 has become an icon for sixteen-year-olds, a sales phenomenon and a new fashion. It is the starting point for those who want to experience the thrills of off-roading but who also want a bike that is perfectly suited to everyday use. Easy to ride, light and manoeuvrable, the 2009 version of the SM 125 has everything it takes to become leader in its class.

The SM 125 is available in either red and white colour scheme or the more sophisticated black version. The white frame and black anodised wheel make the two-stroke look more like the bigger four-stroke version. The highly successful 125 engine has seen improvements “borrowed” from racing models and has been tuned to improve pick-up and offer more output in the low to mid range power band.

The SM 125 features integrated ECS (Electronic Carburetion System) that administers exactly the right amount of fuel (both the air/petrol and oil mix) and that was developed in collaboration with Dell’Orto. The control unit also governs the ignition system. While keeping costs under control and sales prices competitive, this brings the two-stroke 125 engine to Euro 3 standards yet keeps all the advantages that two-stroke engines offer: lightness, performance and low running costs.

As regards suspension, the SM 125 now has specially designed PaioIi forks to enhance the performance characteristics of the model and to compliment the shock absorber.

The new digital instrumentation displays speed, time, mileage, rpm and has a trip-meter as well as the normal warning lights (indicators, full beam, dipped beam, service due etc.).

Selasa, 17 Mei 2011

Benelli BX449 Cross, 2009

Benelli BX449 Cross, 2009

 

ENGINE
TYPE single cylinder 4 stroke DOHC 4 titanium
CYLINDER CAPACITY 449 cc
BORE X STROKE 98 X 59,5
COMPRESSION RATIO 12, 5:1
MAXIMUM POWER 41,3 Kw @ 9500 g/min
MAXIMUM NET TORQUE / RPM 45 Nm @ 7000 g/min
INTAKE VALVE DIAMETER Ø37 mm
EXHAUST VALVE DIAMETER Ø32 mm
LUBRICATION SYSTEM Wet sump and reeds
Carburator, KEIHIN FCR MX 41
CLUTCH Wet clucth 7 steel disks
IGNITION Kokusan CDI digitable
STARTING Kick starter
GEARBOX 5 speed extractable
TRANSMISSION chain 520
ALTERNATOR 60w
CYCLE PARTS
FRAME Aluminium alloy Perimeter with casting, moulded,
extruded parts and structural carbon roods elements patent
FRONT SUSPENSION Ø50 mm fully adjustable
FRONT TRAVEL 310 mm
REAR SUSPENSION Sachs shock absorber fully adjustable
REAR TRAVEL 310 mm
RAKE 26,5°
TRAIL 110 mm
OFFSET 24 mm
FRONT BRAKE Wave,Ø260 mm
REAR BRAKE Wave,Ø220 mm
FRONT RIM 1,60'
FRONT TYRE 80-100/21
REAR RIM 2,15'
REAR TYRE 110-90/19
STEERING ANGLE 45°/45°
SIZES
LENGHT 2160 mm
WIDTH 810 mm
HEIGHT 1240 mm
SEAT HEIGHT 960 mm
WHEELBASE 1450 mm
FUEL TANK CAPACITY 9l
WEIGHT 108 kg 

AD 125 MY09 or AD 200 MY09 ?

AD 125 MY09




ENGINE TRASMISSION
Engine: single cylinder four-cycle
Bore/stroke: 48,8 x 57
Displacement: 124,5 cc
Max power: 9,7kw a 8500 rpm
Max torque: 10,9 Nm a 6500 rpm
Gasoline: unleaded petrol
Lubrification: wet carter
Engine start: electric start
Cooling: water-cooled
Gear: CVT with automatic clutch

WHEELS
Tyres: front 120/70 x 14'', rear 140/70 x 14'' tubeless
Rims: 5 spokes aluminium rims, front 3.50 x 14'', rear 3.50 x 14''
Front brake: 260 mm disc brake
Rear brake:240 mm disc brake

FRAME
Frame: high-resistance steel pipe and traily mixed frame
Windscreen frame: aluminium composite frame
Front suspensions: telescopic hydraulic front forks ø 41 mm
Rear suspensions: engine behaving structural, double rear two-ways shock absorbers preload adjustable on 5 positions

SIZES
Length: 2180 mm
Width: 720 mm
Height: 1759 mm
Seat height: 700 mm
Wheel base: 1560 mm
Dry weight: 170 kg
Gasoline tank: 13 litres (2,2 litres reserve)

HOMOLOGATION
Fuel consumption on bench: 25km/l;
Distance on bench: at 60 km/h 34 km/l
Homologation: Euro 3

ACCESSORIES
Side deflectors
Roof deflectors
S-Thermo scud
Luggage's strap
Rear spoiler
Heater






AD 200 MY09

ENGINE TRASMISSION
Engine: single cylinder four-cycle
Bore/stroke: 61 x 58,6
Displacement: 171,2 cc
Max power: 11,8kw a 7500 rpm
Max torque: 15,3 Nm a 6500 rpm
Gasoline: unleaded petrol
Lubrification: wet carter
Engine start: electric start
Cooling: water-cooled
Gear: CVT with automatic clutch

WHEELS
Tyres: front 120/70 x 14'', rear 140/70 x 14'' tubeless
Rims: 5 spokes aluminium rims, front 3.50 x 14'', rear 3.50 x 14''
Front brake: 260 mm disc brake
Rear brake:240 mm disc brake

FRAME
Frame: high-resistance steel pipe and traily mixed frame
Windscreen frame: aluminium composite frame
Front suspensions: telescopic hydraulic front forks ø 41 mm
Rear suspensions: engine behaving structural, double rear two-ways shock absorbers preload adjustable on 5 positions

SIZES
Length: 2180 mm
Width: 720 mm
Height: 1759 mm
Seat height: 700 mm
Wheel base: 1560 mm
Dry weight: 172 kg
Gasoline tank: 13 litres (2,2 litres reserve)

HOMOLOGATION
Fuel consumption on bench: 25km/l;
Distance on bench: at 60 km/h 32 km/l
Homologation: Euro 3

ACCESSORIES
Side deflectors
Roof deflectors
S-Thermo scud
Luggage's strap
Rear spoiler
Heater

Senin, 16 Mei 2011

Buldog, 2010

 BULDOG, 2010




Specification:

Dry Weight - Front................................322 lbs (146 kg)
Dry Weight - Rear................................446 lbs (202 kg)
Dry Weight - Total.................................768 lbs (348 kg)
GVWR.................................................1208 lbs (548 kg)
GAWR - Front.....................................424 lbs (192 kg)
GAWR - Rear.......................................783 lbs (355 kg)
Saddlebag Capacity (lbs).......................15 lbs (6.8 kg) per bag
Saddlebag Volume (cu ft).......................1 cu ft per bag
Fuel - Total............................................4.5 gal (17.0 L)
Fuel - Main............................................4.1 gal (15.5 L)
Fuel - Reserve.......................................0.4 gal (1.5 L)
Oil Capacity..........................................3.5 qts (3.3 L)
Frame Rake..........................................34 degrees
Tree Rake.............................................3 degrees
Trail.......................................................4.8" (121.9 mm)
Front Suspension...................................41 mm Telescopic
Fork Length...........................................1.0" US (-25.4 mm)
Seat Height............................................24.25" (616.0 mm)
Ground Clearance..................................4.5" (114.3 mm)
Wheel Base............................................74.63" (1895.6 mm)
Total Length...........................................101.5" (2578 mm)
Front Brake............................................4-Piston Diff Bore
Rear Brake.............................................4-Piston
Front Tire................................................120/70-R21 62V
Rear Tire.................................................250/40-R18 81V
Front Tire Pressure..................................40 psi (275.8 kPa)
Rear Tire Pressure...................................42 psi (289.5 kPa)
Front Wheel............................................21" x 3.25" (533.4 mm x 82.5 mm)
Rear Wheel.............................................18" x 8.50" (457.2 mm x 215.9 mm)
Engine.....................................................OHV 45 degree V-Twin
Displacement...........................................111 c.i. (1807 cc)
Bore x Stroke..........................................4.125" x 4.125" (104.8 mm x 104.8 mm)
Compression Ratio...................................9.7:1
Fuel System.............................................CLEFI
Transmission............................................6-Speed
Primary Drive..........................................Chain - Spring Compensated
Final Drive.............................................. 1.125" (28.6 mm) Belt
Ignition.....................................................Electronic Single Fire
Charging Output.......................................35 Amp
Battery.....................................................310 CCA/Sealed AGM