Harley-Davidson Tri Glide Ultra Classic FLHTCUTG, 2009

Harley-Davidson Tri Glide Ultra Classic FLHTCUTG, 2009

Harley-Davidson brings original-equipment design, quality and service to the three-wheel motorcycle segment with the introduction of the 2009 Tri Glide Ultra Classic motorcycle. Based on a new chassis designed specifically for this three-wheel application, the Tri Glide offers the classic styling and popular touring features of the Harley-Davidson Ultra Classic Electra Glide in a vehicle that will be sold and serviced by the network of Harley-Davidson dealers and covered by a two-year Harley-Davidson limited warranty. The Tri Glide will have an MSRP of $29,999.

Harley-Davidson launched a “wheels-up” strategy in the development of the Tri Glide, and has created a frame and associated chassis structure that is engineered specifically to handle the loads generated by the steering forces and weight of a three-wheel vehicle. Changes to the front-end geometry enhance steering control by reducing steering effort up to 25 percent. The forks have been lengthened by 1.775 inches compared to the regular Touring motorcycle, and rake is increased from 29.25 degrees to 32.00 degrees. A steer damper controls coast-down wobble, and minimizes bumps and other road inputs during turning events.

Harley-Davidson has designed a new rear-axle assembly for the Tri Glide that utilizes an aluminum center section with steel axle tubes. The Tri Glide retains the high-strength and low-maintenance advantages of belt final drive, and the smooth operation of a rubber-cushioned, compensated rear drive. The rear suspension features dual air-adjustable rear shock absorbers.

The Tri Glide is powered by a Twin Cam 103 V-Twin engine with Electronic Sequential Port Fuel Injection (ESPFI), rated at 101 ft. lbs. of torque. It retains the 6-speed Cruise Drive transmission used on Harley-Davidson Touring motorcycles, but adds an optional electric reverse ($1,195) integrated with the rear differential assembly that is engaged with a handlebar-mounted reverse module. The Tri Glide has dual front disc brakes and a Hayes Brake dual-disc rear brake system with a lever-actuated, integrated park brake.

Classic Harley-Davidson Styling
The Harley-Davidson styling department gave the new body components of the Tri Glide clean lines that integrate with the existing Ultra bodywork, especially the Tour Pak luggage compartment and the passenger seating area. The new bodywork is painted with the same quality OEM paint and process used on all Harley-Davidson motorcycles, and is a perfect color match for the tank and front fender. The composite rear fenders complement the lines of the front fender. Because the rear fenders are each a separate piece from the rest of the rear bodywork, they can be removed individually for repair or replacement, or when required to service the Tri Glide.

The molded-composite trunk provides 4.5 cubic feet of storage space and can be accessed through a rear hatch. The trunk and Tour Pak have a combined capacity of 6.56 cubic feet and are rated to carry up to 80 pounds. A single key will handle all luggage locking functions, and activate the ignition. Dual mufflers with tapered end caps exit below the trunk. Brake/tail/turn lights are located on each fender, and the Tri Glide retains the Tour Pak lighting used on the Ultra Classic, including the LED side running lights. Matching front and rear black and machined split seven-spoke cast aluminum wheels provide the Tri Glide its integrated and true, factory-built look. The 16-inch front wheel is three inches wide and carries a MT90B16 motorcycle tire, while the 15-inch rear wheels are five inches wide and are fitted with P205/65R15 tires.

Forward of the rear wheels, the Tri Glide retains the style and features of the Ultra Classic Electra Glide, including the distinctive “bat wing” fairing, auxiliary driving lamps, and deep-skirted front fender. A low-profile chrome console tops a six-gallon fuel tank. The fairing holds complete instrumentation and the 80-watt Advanced Audio System with CB radio and passenger intercom system. Adjustable air deflectors on the fairing and vented fairing lowers allow the rider to control wind flow for comfort in warm or cool weather. Cruise control is standard equipment.



FLHTCUTG Tri Glide Ultra Classic features:

• Three-wheel specific frame
• Rubber mounted Twin Cam 103 engine with ESPFI
• 6-speed Cruise Drive transmission
• Black powder-coated engine with chrome treatment
• Brembo dual-disc front brake system
• Hayes Brake dual-disc rear brake system with integrated park brake
• Six-gallon fuel tank
• Electronic Throttle Control
• 2-1-2 exhaust system
• Engine isolation system
• Isolated Drive System
• Triple Circuit Damping (TCD) front forks
• Air-adjustable rear suspension
• Bat-wing, fork-mounted fairing
• Full instrumentation
• 80-watt Advanced Audio System by Harman/Kardon
• 40-watt CB radio and intercom system
• Cruise control
• Shorty antennas
• Clear-lens reflector-optics auxiliary lamps
• Fiberglass adjustable King Tour-Pak with passenger backrest
• Tour-Pak mounted tail/stop light
• Rear luggage trunk
• One-piece, two-up Electra Glide comfort-stitch touring saddle
• Vented lower fairings with integrated storage compartments
• Adjustable fairing wind deflectors
• Steering damper
• Optional electric reverse
• Optional Smart Security System

Classic Harley-Davidson Styling
The Harley-Davidson styling department gave the new body components of the Tri Glide clean lines that integrate with the existing Ultra bodywork, especially the Tour Pak luggage compartment and the passenger seating area. The new bodywork is painted with the same quality OEM paint and process used on all Harley-Davidson motorcycles, and is a perfect color match for the tank and front fender. The composite rear fenders complement the lines of the front fender. Because the rear fenders are each a separate piece from the rest of the rear bodywork, they can be removed individually for repair or replacement, or when required to service the Tri Glide.

The molded-composite trunk provides 4.5 cubic feet of storage space and can be accessed through a rear hatch. The trunk and Tour Pak have a combined capacity of 6.56 cubic feet and are rated to carry up to 80 pounds. A single key will handle all luggage locking functions, and activate the ignition. Dual mufflers with tapered end caps exit below the trunk. Brake/tail/turn lights are located on each fender, and the Tri Glide retains the Tour Pak lighting used on the Ultra Classic, including the LED side running lights. Matching front and rear black and machined split seven-spoke cast aluminum wheels provide the Tri Glide its integrated and true, factory-built look. The 16-inch front wheel is three inches wide and carries a MT90B16 motorcycle tire, while the 15-inch rear wheels are five inches wide and are fitted with P205/65R15 tires.

Forward of the rear wheels, the Tri Glide retains the style and features of the Ultra Classic Electra Glide, including the distinctive “bat wing” fairing, auxiliary driving lamps, and deep-skirted front fender. A low-profile chrome console tops a six-gallon fuel tank. The fairing holds complete instrumentation and the 80-watt Advanced Audio System with CB radio and passenger intercom system. Adjustable air deflectors on the fairing and vented fairing lowers allow the rider to control wind flow for comfort in warm or cool weather. Cruise control is standard equipment.

The Tri Glide Ultra Classic will be offered three colors: Vivid Black, Dark Blue Pearl, and Red Hot Sunglo.

FLHTCUTG Tri Glide Ultra Classic features:
Three-wheel specific frame
Rubber mounted Twin Cam 103 engine with ESPFI
6-speed Cruise Drive transmission
Black powder-coated engine with chrome treatment
Brembo dual-disc front brake system
Hayes Brake dual-disc rear brake system with integrated park brake
Six-gallon fuel tank
Electronic Throttle Control
2-1-2 exhaust system
Engine isolation system
Isolated Drive System
Triple Circuit Damping (TCD) front forks
Air-adjustable rear suspension
Bat-wing, fork-mounted fairing
Full instrumentation
80-watt Advanced Audio System by Harman/Kardon
40-watt CB radio and intercom system
Cruise control
Shorty antennas
Clear-lens reflector-optics auxiliary lamps
Fiberglass adjustable King Tour-Pak with passenger backrest
Tour-Pak mounted tail/stop light
Rear luggage trunk
One-piece, two-up Electra Glide comfort-stitch touring saddle
Vented lower fairings with integrated storage compartments
Adjustable fairing wind deflectors
Steering damper
Optional electric reverse
Optional Smart Security System 

Harley-Davidson Sportster 883 Iron XL883N, 2009

Harley-Davidson Sportster 883 Iron XL883N 2009

The black powder-coated 883cc Evolution powertrain with black covers takes the Iron 883 motorcycle deep into the heart of darkness. With Electronic Sequential Port Fuel Injection (ESPFI) and performance tuning with a broad torque curve, the Iron 883 delivers plenty of power for the city scene. The pipes on the straight cut shorty dual exhaust flow the distinctive Harley-Davidson V-Twin sound. The black chopped rear fender with its combination stop/turn/tail lights shows more of the 150 mm rear tire and black, 13-spoke cast aluminum wheel, while the front tire also rides on a black wheel. The rest of the Iron 883 gets a darker-suited presence with black front forks and fender supports, fuel tank, oil tank cover, belt guard, drag style handlebar and mid mount foot controls. A classic solo seat with a height of 25.3 inches fits the lone rider, while a passenger seat and a backrest in complementing black finishes can be added as accessories.

The Harley-Davidson Sportster motorcycles like the Iron 883 have stood against the grain since their introduction in 1957, when the modern rebel culture was being bred from restless veterans and hot rod pioneers. Sportster motorcycles became the starting point for many legendary choppers of the 1960s, while also getting pumped up for championship dirt racing and dare devil stunt riding in the 1970s.

The black powder-coated 883cc Evolution powertrain with black covers takes the Iron 883 deep into the heart of darkness. With Electronic Sequential Port Fuel Injection (ESPFI) and performance tuning with a broad torque curve, the Iron 883 delivers plenty of power for the city scene. The pipes on the straight cut shorty dual exhaust flow the distinctive Harley-Davidson V-Twin sound.
The black chopped rear fender with its combination stop/turn/tail lights shows more of the 150 mm rear tire and black, 13-spoke cast aluminum wheel, while the front tire also rides on a black wheel. The rest of the Iron 883 gets a darker-suited presence with black front forks and fender supports, fuel tank, oil tank cover, belt guard, drag style handlebar and mid mount foot controls.
A one-piece, solo classic seat with a height of 25.3 inches fits the lone rider, while a passenger seat and a backrest in complementing black finishes can be added as accessories.

Iron 883 features and highlights:
Rubber-mounted Evolution 883 cc V-Twin black powder-coated engine
Electronic Sequential Port Fuel Injection (ESPFI)
Black fuel tank with unique graphics
Black front forks with gaiters
Black belt guard and front fender supports
Black, 13-spoke cast aluminum wheels, 19-inch front / 16-inch rear
Black low rise drag style handlebar
Black mid-mount foot controls
Black low profile front fender
Black chopped rear fender with combination rear stop/tail/turn lights
Chrome staggered shorty exhaust with dual mufflers
Side-mounted license plate holder
One-piece, solo Sportster classic seat
25.3-inch seat height
Optional Harley-Davidson Smart Security System
Classic 3.3-gallon fuel tank

The Dimensions
Length 85.80 in. (2179.32 mm)
Overall Width 32.32 in. (820.93 mm)
Overall Height 43.60 in. (1107.44 mm)
Seat Height:
• Laden2 25.30 in. (642.62 mm)
• Unladen 26.30 in. (668.02 mm)

The Ground Clearance 3.90 in. (99.06 mm)
Rake (steering head) 29.6°
Fork Angle 29.6°
Trail 4.60 in. (116.84 mm)
Wheelbase 60.00 in. (1524.00 mm)
Tires (Dunlop® Harley-Davidson Series, blackwall):
• Front – D401F 100/90-19 57H
• Rear – D401 150/80B16 71H

The Fuel Capacity
3.30 gal. (12.49 L) (warning light at approximately .80 gal.)
Oil Capacity (w/filter) 2.80 qts. (2.65 L)
Transmission Capacity 1 qts. (0.95 L)
The Weight:
• As Shipped 548 lbs. (248.57 kg)
• In Running Order 565 lbs. (256.28 kg)
• Gross Vehicle Weight Rating
• Gross 1000 lbs. (453.59 kg)
• Front Axle Weight Rating 335 lbs. (151.95 kg)
• Rear 665 lbs. (301.64 kg)

The Engine
Engine3
Air-cooled, Evolution
Valves
Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke
3 in. x 3.812 in.
(76.20 mm x 96.82 mm)
Displacement3
53.89 cu. in. (883.10 cu. cm)
Compression Ratio 8.9:1

Fuel System9
Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner
Paper cartridge type
Lubrication System
Dry-sump

Drivetrain
Primary Drive
Chain, 57/34 ratio
Final Drive
Belt, 68/28 ratio
Clutch 9-plate, wet

The Transmission
5-speed
Gear Ratios (overall): U.S. HDI JPN
• 1st 10.782 10.782 10.782
• 2nd 7.702 7.702 7.702
• 3rd 5.728 5.728 5.728
• 4th 4.748 4.748 4.748
• 5th 4.071 4.071 4.071


Wheels4:
Black, 13-Spoke Cast Aluminum
• Front 19 in. x 2.15 in. (482.60 mm x 54.61 mm)
• Rear 16 in. x 3 in. (406.40 mm x 76.20 mm)

The Brakes:
• Caliper Type Dual-piston front, single-piston rear
• Rotor Type Patented, uniform expansion rotors
(diameter x width):
• Front 11.50 in. x .20 in. (292.10 mm x 5.08 mm)
• Rear 11.50 in. x .23 in. (292.10 mm x 5.84 mm)

The Suspension Travel:
• Front Wheel 3.62 in. (91.95 mm)
• Rear Wheel 1.63 in. (41.40 mm)

The performance
Engine Torque5 (per SAE J1349):
• North America 55 ft. lbs. @ 3500 rpm (74.58 NM @ 3500 rpm)
• World 51.29 ft. lbs. @ 3750 rpm (69.55 NM @ 3750 rpm)
• Japan 49.07 ft. lbs. @ 3500 rpm (66.54 NM @ 3500 rpm)

Lean Angle (per SAE J1168):
• Right 30°
• Left 29°

Fuel Economy7
(EPA urban/highway test) 45/60 mpg (5.23/3.92 L/100 km)

The Electric
Battery (per Battery Council International Rating)
Sealed, maintenance-free, 12V, 12-amp/hour, 200 cca
Charging
Single-phase, 30-amp system
(357W @ 13.5V, 2000 rpm, 405W max power @ 13.5V)
Starting
1.2 kW electric with solenoid shift starter motor engagement

Lights (as per country regulation):
• Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam
• Tail/Stop Lights 8W/28W Per Lamp
• Turn Signal Lights 28W self-canceling
• Indicator Lamps High beam, neutral, low oil pressure, turn signals, engine diagnositcs,
low fuel warning, low battery, security system6

Aprilia FV2 1200 Concept, 2009

Aprilia FV2 1200 Concept 2009

The Aprilia FV2 1200 is a concentration of technical innovation, a blend of technology, performance, and pure adrenaline. This amazing concept bike embodies the sum total of Aprilia's current technical know-how and points in the direction that technical development is likely to take at Noale in the next few years.

APRILIA FV2 1200
The FV2 1200 embodies the latest Aprilia technology and reveals the direction likely to be taken by technical and stylistic development at Aprilia in the near future.
The heart of the FV2 1200 is Aprilia's mighty, 1200 cc, 90° V twin, a power plant that confirms Aprilia's determination to develop high capacity, high technology engines using in-house skills and competence.
The minimalist bodywork of the FV2 1200 creates a stunning preponderance of volume towards the front of the bike. The result is a revolutionary, courageous and futuristic look that is destined to form the solid basis for the evolution of Aprilia motorcycle styling.

The engine also fulfils a structural role, and acts as the starting point for the backbone of the motorcycle, a carbon fibre, load bearing frame with integrated filter box. The seat is supported by an aluminium beam and by two carbon fibre struts that extend into the tail and around the rear light cluster. The parallelogram front suspension is based on the system already tried and tested on Aprilia's 250 cc GP racers.



These futuristic solutions have led to an amazing weight reduction (the FV2 1200 weighs under 160 kg) and an extremely compact size. The extraordinary agility that has always typified Aprilia motorcycles therefore finds its utmost expression in the FV2 1200.

The 1200 cc V twin engine is liquid cooled and boast a ride-by-wire control system. Traction control, a latest generation ABS system and electronic suspension management are also provided to let you ride at your performance peak while maintaining complete control over the bike.

The Aprilia FV2 1200's dashboard incorporates a multi-functional instrument cluster that can be interfaced not only with the bike's own CAN line but with a PC too, making it possible to download telemetric data for personal performance evaluations, reconfigure the information shown on the matrix display, load new mappings from the internet, display itineraries, and integrate GPRS and GSM modules for mobile phone connectivity.

Can-Am Spyder RTS roadster, 2010

  Can-Am Spyder RTS roadster, 2010

Media Press Release

Washington, D.C., September 2, 2009 – BRP introduces the new Can-Am Spyder RT roadster in response to specific consumer demand for a touring platform. The 2010 Can-Am Spyder roadster line-up now includes the Spyder RS (roadster sport) and the Spyder RT (roadster touring) models.
The introduction of the touring model coincides with a substantial gain in market presence on the heels of strong consumer demand since the roadster’s launch more than two years ago. Driven by a passionate owner community, the innovative three-wheel concept has become a global phenomenon in more than 50 countries to-date with authorized BRP dealers.

The Can-Am Spyder RT roadster powered by a Rotax 991 engine with Electronic Throttle Control optimized for touring stays true to the brand’s promise to deliver a perfect balance of performance and peace of mind. The roadster features the same acclaimed BOSCH-engineered Vehicle Stability System (VSS) as found in the Spyder RS roadster, which includes Anti-lock Brakes, Traction Control and Stability Control systems. The VSS, coupled with the inherent stability of the roadster’s ‘Y-architecture’ and overall ease of use reinvents riding for enthusiasts of all skill levels.



BRP is also introducing an industry-first optional RT622 trailer package*, providing an additional 622 litres (22 cu. ft) of storage, designed specifically for the Spyder RT roadster and compatible with the vehicle’s stability system.

Bombardier Recreational Products (BRP), a privately-held company, is a world leader in the design, development, manufacturing, distribution and marketing of motorized recreational vehicles. Its portfolio of brands and products includes: Ski-Doo and Lynx snowmobiles, Sea-Doo watercraft and sport boats, Evinrude and Johnson outboard engines, direct injection technologies such as E-TEC, Can-Am all-terrain vehicles and roadsters, as well as Rotax engines and karts. With manufacturing facilities on three continents, BRP products are distributed in more than 80 countries.

BMW R1200GS, 2004

BMW R1200GS 2004

It would seem that BMW is getting ready to show the world the new bike.

The German motorcycle magazine Motorrad Aktuell has published on its front page a decent photo of the soon-to-be-announced BMW R1200GS. This photo seems to be much more in line with what we'll actually see, since it's not a spy photo.

The British magazine MCN published spy photos of the new BMW R1200GS, the replacement of the successful R1150GS. The first change is obvious with its name... the 1150 engine is replaced by a 1200 cc engine!

MCN confirm that the weight drops 30 kilos. Not much other details are available, but the bike is looking very promising. With a bigger engine, and less weight, it should be able to reach better performances.

Suzuki Biplane, 2008

Suzuki Biplane, 2008

Suzuki Biplane, 2008

Harley-Davidson Sportster 883 Low XL883L, 2009

Harley-Davidson Sportster 883 Low XL883L 2009

The 883 Low inspires confident riding for those who appreciate a lighter, nimble motorcycle with signature Evolution V-Twin performance.

The evolution of the Harley-Davidson hot rod, as most Sportster models roll into the new year on retuned suspension. Five Sportster models retain the raw, soulful styling that represents the uninhibited essence of motorcycling. Responsive handling, the flat torque delivery and distinctive sound of an American V-Twin engine, and classic styling cues make Harley-Davidson Sportster a motorcycle that just keeps getting better.
When it debuted in 1957, the original Sportster projected a tough and rebellious attitude that was born on the gritty dirt tracks and drag strips of that era. That spirit lingers in every new Sportster model, from the retro-bobber Nightster to the glittering chrome of the long 1200 Custom.
Sportster models are powered by the Electronic Sequential Port Fuel Injection (ESPFI) XL Evolution V-Twin powertrain, rubber-mounted in the frame to reduce vibration and tuned to deliver a flat torque curve for responsive performance. Among the most-affordable Harley-Davidson models, Sportster motorcycles offer a low, comfortable seat, smooth clutch effort, and a durable carbon fiber reinforced final drive belt.

New on Sportster

*The Enhanced Suspension: The suspension is upgraded on the 883 Custom, 1200 Low and 1200 Custom. Springs and dampening rates have been recalibrated and new damping devices were installed to provide superior ride quality.
*The New Front Fenders: All Sportster models get a new low-profile front fender that hugs the tire for a streamlined, custom look.

Sportster 883 Low features:
Rubber-mounted XL 883cc Evolution engine
Silver powder-coated engine with polished treatment
Lowered front and rear suspension
Silver 13-spoke Cast Aluminum wheels, 19-inch front / 16-inch rear
New low profile front fender
Wide reduced-reach polished handlebar
Reduced-reach solo seat
Chrome Staggered Shorty Dual exhaust
Mid-mount foot controls
Lowest-Profile rear shocks
Lowest-Profile front forks
Easy Reach sidestand
Classic 3.3-gallon fuel tank
Optional Chrome Laced Steel wheels
Optional Smart Security System


Dimensions
Length 89.10 in. (2263.14 mm)
Overall Width 35.20 in. (894.08 mm)
Overall Height 45.70 in. (1160.78 mm)
Seat Height:
• Laden2: 25.30 in. (642.62 mm)
• Unladen: 26.30 in. (668.02 mm)
Ground Clearance 3.90 in. (99.06 mm)
Rake (steering head) 29.6°
Fork Angle 29.6°
Trail 4.60 in. (116.84 mm)
Wheelbase 60 in. (1524 mm)
Tires (Dunlop Harley-Davidson Series, blackwall):
• Front – D401F 100/90-19 57H
• Rear – D401 150/80B16 71H
Fuel Capacity 3.3 gal. (12.49 L)
(warning light at approximately 0.80 gal.)
Oil Capacity (w/filter) 2.80 qts. (2.65 L)
Transmission Capacity 1 qts. (0.95 L)

Weight:
• As Shipped 563 lbs. (255.37 kg)
• In Running Order 583 lbs. (264.44 kg)
• Gross Vehicle Weight Rating 1000 lbs. (453.59 kg)
• Gross Axle Weight Rating
• Front 335 lbs. (151.95 kg)
• Rear 665 lbs. (301.64 kg)

Engine
Engine3 Air-cooled, Evolution
Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke 3 in. x 3.81 in. (76.20 mm x 96.77 mm)
Displacement3 53.86 cu. in. (883 cu. cm)
Compression Ratio 8.9:1
Fuel System9 Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner Paper cartridge type
Lubrication System Dry-sump

Drivetrain
Primary Drive Chain, 57/34 ratio
Final Drive Belt, 68/28 ratio
Clutch 9-plate, wet
Transmission 5-speed
Gear Ratios (overall): U.S. HDI JPN
• 1st 10.782 10.782 10.782
• 2nd 7.702 7.702 7.702
• 3rd 5.728 5.728 5.728
• 4th 4.748 4.748 4.748
• 5th 4.071 4.071 4.071

Chassis
Frame Mild steel, tubular frame; circular sections; cast junctions
Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Forks 39 mm
Rear Shocks Coil-over; preload dual-adjustable
Wheels4 (Chrome, Laced Steel option):
Silver, 13-Spoke Cast Aluminum
• Front 19 in. x 2.15 in. (482.60 mm x 54.61 mm)
• Rear 16 in. x 3 in. (406.40 mm x 76.20 mm)

Brakes:
• Caliper Type Dual-piston front, single-piston rear
• Rotor Type Patented, uniform expansion rotors
(diameter x width):
• Front 11.50 in. x .20 in. (292.10 mm x 5.08 mm)
• Rear 11.50 in. x .23 in. (292.10 mm x 5.84 mm)

Suspension Travel:
• Front Wheel 3.62 in. (91.95 mm)
• Rear Wheel 1.63 in. (41.40 mm)

Lean Angle (per SAE J1168):
• Right 29°
• Left 31°

Fuel Economy7
(EPA urban/highway test) 45/60 mpg (5.23/3.92 L/100 km)

Electric
Battery (per Battery Council International Rating) Sealed, maintenance-free, 12V, 12-amp/hour, 200 cca
Charging Single-phase, 30-amp system (357W @ 13.5V, 2000 rpm, 405W max power @ 13.5V)
Starting 1.2 kW electric with solenoid shift starter motor engagement
Lights (as per country regulation):
• Headlamp (quartz halogen) 55-watt low beam, 60-watt high beam
• Tail/Stop Lights 8W/28W (5W/21W)
• Turn Signal Lights 28W (21W) self-canceling
• Indicator Lamps: High beam, neutral, low oil pressure, turn signals, engine diagnostics, low fuel warning, low battery, security system6 (optional)
POWERTRAIN
Engine 2 Air-cooled, Evolution
Displacement 882.61 cm³
Bore x Stroke 76.20 mm x 96.77 mm
Engine Torque 3 74.58 Nm @ 3500 rpm
Fuel System 4 Electronic Sequential Port Fuel Injection (ESPFI)
Compression Ratio 8.9:1
Liters per 100 KM
ESPFI 4.4 hwy / 6.9 city
Primary Drive Chain, 57/34 ratio
Gear Ratio (overall)
1st 9.004
2nd 6.432
3rd 4.783
4th 3.965
5th 3.4
6th N/A

The WHEELS/TIRES
Wheels 5
Front Silver, 13-spoke Cast Aluminum
Rear Silver, 13-spoke Cast Aluminum
Wheel Option Chrome, Laced Steel
Tire Size
Front 100/90-19 57H
Rear 150/80B16 71H

The ELECTRICAL
Instruments Handlebar-mounted electronic speedometer with odometer, time-of-day clock on odometer, dual tripmeter, low fuel warning light, low oil pressure light, engine diagnostics readout, LED indicator lights
Indicator Lamps 6 High beam, neutral, low oil pressure, turn signals, engine diagnostics, low fuel warning, low battery, security system6 (optional)
Reverse Function N/A

The CHASSIS
Brakes Dual-piston front, single-piston rear
Parking Brake N/A
Lean Angle (per SAEJ1168) 31° / 29°
Exhaust System Chrome, staggered shorty exhaust w/ dual mufflers

Buell 1125R, 2009

Buell 1125R 2009

The superbike category of Buell 1125R is powered by the 1125 cc liquid-cooled 72-degree V-Twin Helicon engine generating 146 crank hp and 82 ft. lbs. of peak torque. With a foundation built on the core Buell Trilogy of Technology creating optimum performance, the 1125R remains true to Buell’s original sense of sportbike style and design.

The new gear position readout is added to the digital display on the instrument panel as a scroll-to feature. A high-output alternator has increased capacity for accessory use. Slider bobbins have been added to the swingarm for protection and easy use of a rear stand.
The front wheel rides on fully adjustable Showa 47 mm upside-down forks, while the Buell ZTL2 front brake has an eight-piston caliper. A smooth-shifting six-speed transmission works with a HVA (Hydraulic Vacuum Assist) slipper-action clutch that uses engine vacuum for easy clutch-lever action and reduced engine braking during downshifts.
The Quiet Zone aerodynamics optimize air flow around the rider for enhanced race performance and rider comfort. The fairing shape was developed using Computational Fluid Dynamics (CFD) analysis, and features six-bulb headlamps, while LED turn signals are integrated into the mirror housings.

The Buell 1125R highlights
Buell Helicon 1125 cc liquid-cooled four-stroke, 72-degree V-Twin engine
146 peak hp @ 9800 rpm
82 ft. lbs. peak torque at 8000 rpm
New Phantom Metallic frame and swingarm with blacked-out footpeg mounts and heel guards
New tinted windscreen, Hero Blue with Arctic White bodywork and Smoked with Racing Red and Midnight Black
New gear position readout on the instrument cluster
New high output alternator increases capacity for accessory use
New slider bobbins on swingarm for protection and use of rear stand
Underslung muffler with Helmholtz chamber
DDFI 3 Electronic Fuel Injection ECM
New targeted fuel injectors
Ram-air pressurized air box
Twin side-mount radiators
HVA (Hydraulic Vacuum Assist) Slipper Action clutch
ZTL2 four-pad, eight-piston front brake
Fully adjustable 47 mm Showa inverted fork
Fully adjustable Showa rear shock absorber
Fuel-in Frame 5.3-gallon capacity
Dry Weight: 375 pounds
Wheelbase: 54.6 inches
Seat height: 30.5 inches
Pirelli Diablo Corsa III tires
Pre-Wired for Accessory Heated Grips
Midnight Black, Arctic White or Racing Red bodywork

The SPECIFICATIONS:
Dimensions
Overall Length6 78.6 in. (1996 mm)
Overall Width8 28.2 in. (716 mm)
Seat Height7 30.5 in. (775 mm)
Ground Clearance6 4.50 in. (114 mm)
Rake7 (steering head) 21.0°
Fork Angle7 21.0°
Lean Angle9:
• Soft Contact, Right - 48°
• Soft Contact, Left-48°
• Hard Contact, Right-50°
• Hard Contact, Left-50°

Trail7 3.3 in. (84 mm)
Wheelbase6 54.6 in. (1387 mm)
Tires4 (Pirelli Diablo Corsa III):
• Front 120/70 ZR-17
• Rear 180/55 ZR-17

Fuel Capacity 5.30 gal. (20.1 L)
Fuel Economy2
(EPA urban/highway test)
39/53 mpg (6.0/4.4 L/100 km)
Reserve Fuel Capacity 0.8 gal. (3.0 L)

Weight:
• Dry Weight
• Gross Vehicle
Weight Rating
370 lbs. (168 kg)
850 lbs. (386 kg)
Load Capacity 390 lbs. (179 kg)

The Engine
Engine Helicon liquid-cooled, 4-stroke, 72° V-Twin
Valves Dual OHC, four valves per cylinder,
finger follower design and shimming
Bore x Stroke 4.055 in. x 2.658 in.
(103.00 mm x 67.50 mm)
Displacement 68.70 cu. in. (1125 cc)
Compression Ratio 12.3:1
Fuel Delivery Dual 61 mm down draft throttle
bodies, DDFI III fuel injection
Intake Zero-resistance airbox, pressurized
RAM air intake
Exhaust Tuned, tri-pass resonance chamber
with intregal helmholtz tuning and
mass-centralized mounting

The Torque
(North America per SAE J607) 82 ft. lbs. @ 8000 rpm
(111.2 nm @ 8000 rpm) Horsepower
(North America per SAE J607) 146 hp @ 9800 rpm
Lubrication Dry-sump with integrated oil reservoir in lower crankcase
Oil Capacity10 2.7 qts. (2.6 L)
Oil Filtration Disposable cartridge and washable strainer

Yamaha BW'S Concept, 2007

Yamaha BW'S Concept, 2007

The BW'S Concept:

• Length/Width/Height=1,910/715/1,110mm
• Engine type=Air-cooled 4-stroke SOHC
• Cylinder arrangement= Single
• Fuel supply system=Electronic fuel injection

The stylish variation on the BW's scooter features large-diameter block-pattern tires and special high-spec parts in the front and rear suspensions and brakes plus a wild and tough design that projects an off-road image. The result is a fun-filled commuter bike that brings excitement into everyday riding.

Husaberg FE450 Enduro, 2010

Husaberg FE450 Enduro, 2010

The new generation  Husaberg FE450 Enduro, 2010

Key features

Upside-down fork
The fully adjustable 48 mm fork from WP Suspension has been further optimised to ensure even more responsive handling and provide high damping reserves. Combined with the increased 22 mm offset (previously 19 mm) of the CNC-machined triple clamps, this guarantees more reliable front wheel control.

Airbox
Positioned directly behind the fuel cap, it is covered by the front section of the seat. The airbox’s elevated position guarantees the intake of cool, clean air and maximum wading depth. The intake duct is in the direct downdraft from the filter to the cylinder.

Tank
The slim, 8.5 litre tank runs far below the seat to provide an optimal centre of gravity and is equipped with both a compact fuel pump and new reserve sensor. The transparent polyethylene also enables the fill level to be determined at a glance.

Exhaust System
The integration of the stainless steel exhaust manifold offers optimum protection from rock damage and keeps the rider from coming into direct contact with it.



Brakes
The latest Brembo front brake with optimised front brake pads for maximum braking performance at minimal effort. Effective single-piston brake caliper in the rear. Ultra-light wave discs for the ultimate braking performance and better self-cleaning of the brakes.

PDS Shock
Fully adjustable WP PDS shock with optimised setting for even more traction. Adjustable rebound damping and variable high and low speed compression damping guarantee the perfect configuration for all conditions.

Frame
Light double-cradle perimeter frame made of chrome-molybdenum. Guarantees the greatest torsional rigidity and secure tracking stability. Extremely slender lower tube loops. Minimal overall width. Unbeatable ground clearance.

Silencer
Especially light and made of highquality aluminium, the silencer assures compliance with all official noise limits.

Subframe
Cross-linked polyethylene (PE) ensures that the plastic construction has the highest stability values and a reduced weight at the same time. Many electric components have been perfectly imbedded in the rear fender.

Engine
Engine type Single cylinder, 4-stroke
Displacement 449.3 cc
Bore/Stroke 95 / 63.4 mm
Compression ratio 11.8 : 1
Starter/Battery Electric starter/12 V 7 Ah
Transmission 6 gears
Fuel system Keihin EFI
Control 4 V / OHC with rocker levers
Lubrication Pressure lubrication with 2 oil pumps
Engine Oil Motorex, SAE 10W-50
Primary ratio 33 : 76
Secondary drive 13 : 38 (13 : 52)
Cooling Liquid cooling
Clutch Wet multi-disc clutch, hydraulically operated
Engine Management System Keihin

Chassis
Frame Double cradle perimeter design 25CrMo4
Subframe Cross-linked Polyethylene (PE)
Handlebar Magura, Aluminium Ø 28 / 22 mm
Front suspension WP-USD Ø 48 mm
Rear suspension WP-PDS shock absorber
Suspension travel front/rear 300 / 335 mm
Front/rear brakes Disc brake Ø 260 mm/Disc brake Ø 220 mm
Front/rear rims 1.60 x 21" DID/2.15 x 18" DID
Front/rear tires 90/90-21"; 140/80-18"
Chain 5/8 x 1/4"
Silencer Aluminium
Steering Head Angle 63.5°
Wheel base 1,475 ± 10 mm
Ground clearance 390 mm
Seat height 985 mm
Tank capacitiy approx. 8.5 litres
Weight (Ready to Race) approx. 114 kg

Suzuki DR-Z400SM, 2009

Suzuki DR-Z400SM, 2009 

USA Specifications

Model Number DRZ400SMK9

Type Supermoto

Suggested Retail $6299
SEP $436
Engine 4-stroke, liquid-cooled, DOHC
Bore & Stroke 90.0 mm (3.543 in) x 62.6 mm (2.465 in)
Compression Ratio 11.3 : 1
Fuel System MIKUNI BSR36, single
Lubrication Dry sump
Ignition Electronic ignition (CDI)
Starter Electric
Transmission 5-speed constant mesh
Final Drive RK520KZO, 110 links
Overall Length 2225 mm (87.6 in)
Overall Width 855 mm (33.7 in)
Overall Height 1200 mm (47.2 in)
Seat Height 890 mm (35.0 in)
Ground Clearance 260 mm (10.2 in)
Wheelbase 1460 mm (57.5 in)
Dry Weight 146 kg (321 lbs)
Suspension Front Inverted telescopic, coil spring, oil damped
Suspension Rear Link type, coil spring, oil damped
Brakes Front Disc brake
Brakes Rear Disc brake
Tires Front 120/70R17M/C 58H, tube type
Tires Rear 140/70R17M/C 66H, tube type
Fuel Tank Capacity 10.0 L (2.6/2.2 US/Imp gal) - Including Reserve (CA: 9.5 L (2.5/2.1 US/Imp gal) -Including Reserve)
Color Black, White

Chassis:

• Brakes Front Disc brake
• Brakes Rear Disc brake
• Color Black, White
• i Curb Weight 146 kg (321 lbs)
• Final Drive RK520KZO, 110 links
• Fuel Tank Capacity 10.0 L (2.2 Imp gal) - Including Reserve
• Ground Clearance 260 mm (10.2 in)
• Overall Length 2225 mm (87.6 in)
• Overall Width 855 mm (33.7 in)
• Seat Height 890 mm (35.0 in)
• Suspension Front Inverted telescopic, coil spring, oil damped
• Suspension Rear Link type, coil spring, oil damped
• Tires Front 120/70R17M/C 58H, tube type
• Tires Rear 140/70R17M/C 66H, tube type
• Transmission 5-speed constant mesh
• Wheelbase 1460 mm (57.5 in)

Engine:

• Bore Stroke 90.0 mm (3.543 in) x 62.6 mm (2.465 in)
• Compression Ratio 11.3 : 1
• Engine 4-stroke, liquid-cooled, DOHC
• Fuel System MIKUNI BSR36, single
• Ignition Electronic ignition (CDI)
• Lubrication Dry sump
• Starter Electric

KTM 65XC, 2009

KTM 65XC, 2009

Specifications

Engine type Single Cylinder, 2-Stroke, Case Reed Induction, Liquid Cooled
Displacement 64.85cc
Bore x stroke 45/40.8 mm (1.77/1.61")
Starter Kick starter
Transmission 6 gears
Carburetor Mikuni VM 24
Lubrication Lubrication mixture 60:1
Engine lubrication 15W50
Primary drive 23:75
Final drive 14:50
Cooling Liquid cooled
Clutch Wet multi-disc clutch, operated hydraulically
Ignition Moric digital 2M1


Frame Central double-cradle-type 25CrMo4
Subframe Aluminum 7020
Handlebar Pro-Taper Aluminium Ø 22 mm (0.87")
Front suspension Marzocchi USD Ø 35 mm (1.38")
Rear suspension WP monoshock
Suspension travel front/rear 220/270 mm (8.66/10.63")
Brakes, front/rear Disc brake Ø 200/160 mm (7.87/6.3")
Rims, front/rear 1.6 x 14" / 1.6 x 12" Aluminum
Tires, front/rear 60/100-14"; 80/100-12"
Chain 1/2 x 1/4" O-Ring
Main silencer Aluminum 65 SX
Steering head angle 64.5°
Trail Adjustable
Wheel base 1137mm ± 10mm (44.76"±0.39")
Ground clearance (unloaded) 280mm (11")
Seat height 750mm (29.53")
Tank capacity approx. 3.5 liters (0.91 gal)
Weight (no fuel) approx. 55.4 kgs (122.14 lbs) 

Hyosung GV250 Aquila, 2009

Hyosung GV250 Aquila, 2009

Hyosung GV250 Aquila, 2009

Features & Benefits
Air/Oil cooled for efficient engine cooling.
Double piston of large size disk (Ø 275mm) Disk brake of strong brake force that employs caliperwide and comfortable seat, low seat height 700mm.
Rear combination and turn-signal lamp for excellent rear visual recognition.
High-capacity (14 l) fuel tank of two-tone color with beautifully curved lines.
Aluminum casting wheel and extra-wide tubeless tire (rear wheel : 150/80 - 15 MCs 70 Ss).

ENGINE
Type Four-stroke, oil/air-cooled
DOHC 8 Valve, V-twin
Displacement (cc) 249
Fuel System Twin 26mm carburetors
Starting System Electric

CAPACITY
Fuel Tank (litres) 14

TRANSMISSION
Clutch Wet Multi-Plate
Gears 5 Speed

CHASSIS
Front Tyre 110/90-16 59S
Rear Tyre 150/80-15 70S
Front Suspension 41mm Forks
Rear Suspension Twin Shocks
Front Brake Disc
Rear Brake Drum

DIMENSIONS AND DRY MASS
Overall Length (mm) 2,270
Overall Width (mm) 800
Overall Height (mm) 1,090
Wheel Base (mm) 1,500
Dry Mass (kg) 155
Seat Height (mm) 695

ACCESSORIES
Backrest Centre Stand Kit
Fog Lamps Footboards
Cruiser Muffler Windshield

Hyosung GT250R, 2009

Hyosung GT250R, 2009

 

As smooth as silk.

Turn bad roads into good ones with our top-selling 250cc road bike. Silky, responsive and agreeable on the wallet, the GT250R is wrapped in a stunningly gorgeous fairing combined with racy
clip-on handlebars.

The chassis is a dual lateral bar frame designed to reduce weight and lower the center of gravity. The GT250R shares the distinct styling of the GT650R featuring a 2 stage projection beam for greater visibility and VFD ("Vacuum Fluorescent Display" commonly used in luxury automobiles for the digital displays).

Features and Benefits
The 2 Stage Projection Beam Head Lamp is not only functional for great visibility but is also distinctive in styling and make the GT250R Highly Recongnizable.



ENGINE
Type Four-stroke, oil/air cooled,
DOHC 8 Valve, 75-degree V-twin
Displacement (cc) 249
Fuel System Twin 26mm carburetors
Starting System Electric

CAPACITY
Fuel Tank (litres) 17

TRANSMISSION
Clutch Wet Multi-Plate
Gears 5 Speed

CHASSIS
Front Tyre 110/70-17 54H
Rear Tyre 150/70-17 69H
Front Suspension 41mm USD Forks
Rear Suspension Mono Shock, Pre-Load Adjustable
Front Brake Twin Discs
Rear Brake Disc

DIMENSIONS AND DRY MASS
Overall Length (mm) 2,060
Overall Width (mm) 655
Overall Height (mm) 1,125
Dry Mass (kg) 168
Wheel Base (mm) 1,435
Seat Height (mm) 780
Frame Type Perimeter Double Cradle

ACCESSORIES
Sports Muffler Sports Carrier
Centre Stand Kit Tinted Screen

BMW K1300GT, 2009

BMW K1300GT 2009

Introducing the new K 1300 GT, BMW Motorrad is opening up new dimensions in the BMW Touring Encounter World in terms of both riding dynamics and grand touring qualities, enhancing the Company's worldwide leadership in the Dynamic Tourer segment.

Offering even greater supremacy all along the drivetrain, an even higher standard of quality, an aerodynamic fairing enhanced to a new level of perfection, and a wide range of special equipment, the new K 1300 GT stands for Gran Turismo of the highest calibre. It combines maximum agility and sporting riding dynamics with the ideal package for long tours. And with its engine output 118 kW (160 hp), together with maximum torque of 135 Newtonmetres (99 lb-ft), the new K 1300 GT also benefits from the increase in engine size and stands out as one of the most powerful motorcycles in its segment.

The new K 1300 GT is a High Performance Tourer featuring the innovative and proven highlights of the new K 1300 S in terms of performance, riding safety and technology. The drivetrain and suspension come largely from the K 1300 S, but have been adapted in their specific features and details to all the requirements of a dynamic tourer. The highlights in developing the new K 1300 GT were enhanced riding dynamics and even greater supremacy combined with outstanding comfort and optimum qualities for all kinds of motorcycle tours.

An overview of technical highlights:

. E ven more traction and pulling force, particularly at low and medium engine speeds, through the increase in engine capacity.

. Engine output 118 kW (160 hp) at 9,000 rpm, peak torque of 135 Newtonmetres (99 lb-ft) at 8,000 rpm.

. Signifi cant increase in torque from 3,500 rpm.

. Fulfi lment of the strictest environmental standards through newly set-up Digital Motor Electronics.

. O ptimisation of the emission system through rear mufflers modifi ed inside and a fully-controlled three-way catalytic converter.

. Desmodromic operation of the gas lever function for even better and more precise gas dosage.

. Optimised, maintenance-free shaft drive with a new, two-stage drive shaft.

. Even greater driving precision and optimised response combined with maximum riding stability ensured by the optimised Duolever front-wheel suspension complete with a newly designed lower longitudinal arm.

. Second-generation ESA II Electronically Adjustable Suspension and ASC Anti-Spin-Control as an option.

. New, innovative generation of switches and controls with optimised ergonomics.

. I ntegral ABS (semi-integral) featured as standard for a high level of active safety.

. Wide range of equipment and accessories tailored to the new machine at BMW's usual high level of perfection.

. Seat and handlebar adjustable.

. Optimised full fairing.

. Electrically adjustable windshield.

Optional extras:
. Heated handles.
. Heated seat.
. Cruise Control.
. ESA II (Electronic Suspension Adjustment II; new).
. Low rider?fs seat (approx 800 mm/31.5" adjustable to 820 mm or 32.3", step arch length 1,760 mm/68.9").
. High windshield.
. Immobiliser.
. Xenon headlight.

Range of Equipment
. On-board computer including oil level warning unit.
. ASC Anti-Slip Control.
. TPC Tyre Pressure Control.

Special equipment:
Luggage and storage options:
. Watertight tank rucksack.
. Watertight tank bag including fastening elements.
. Sports softbag, small 19 litres/large 51 litres.
. Watertight luggage roll, 53 litres, including lashing belt with tightening lock.
. Luggage spider.
. Impact protector for system cases, left or right.
. Inner bag for system cases, left or right.
. Topcase, large, in white aluminium, 49 litres including attachments and locking cylinder.
. Topcase, small, 28 litres including attachments and locking cylinder.
. Inner bag for topcase, large/small.

. Back padding for topcase, small.

Maintenance and technical features:
. On-board toolkit/service kit.
. Paddock stand including adapter.
. 230 V/110 V battery charger including adapter.
. Repair kit for tubeless tyres.
. Repair instructions for K-models, DVD.
. Motorcycle cleaner.
. Additional power socket.
. LED light for on-board socket.

Ergonomics and comfort:
. Heated handles with control unit.
. Low rider?fs seat (approx 800 mm/31.5" adjustable to 820 mm or 32.3", step arch length 1,760 mm/68.9").
. Windshield, large.
. Windshield, tinted.

Safety and security:
. Immobiliser with remote control.
. First-aid kit, large/small.
. Motorcycle cover.

Navigation and communication:
. BMW Motorrad ZUMO navigation and communication unit incl holder (new).

Victory Arlen Ness Victory Vision, 2009

Victory Arlen Ness Victory Vision, 2009
USA Specifications, $24,999.00

Engine

• Engine 4-stroke, 50° V-twin, single overhead camshafts with 4-valves per cylinder, self-adjusting cam chains, hydraulic lifters
• Displacement 106 ci (1,731 cc)
• Bore x Stroke 101 x 108 mm
• Compression Ratio 9.4:1
• Fuel System Electronic Fuel Injection with dual 45 mm throttle bodies
• Clutch Wet, multi-plate
• Cooling Air / oil
• Exhaust Split dual exhaust with crossover

Dimensions

• Length 103.5 in. (2,629 mm)
• Weight Dry: 804 lbs. (365 kg)
• GVWR: 1,414 lbs. (641 kg)
• Ground Clearance 5.8 in. (148 mm)
• Wheelbase 65.7 in. (1,670 mm)
• Fuel Capacity 6 gal. (22.7 l) with 1 gal. (3.8 l) reserve
• Oil Capacity 5 qt. (4.75 l)
• Seat Height 26.5 in. (673 mm)

Drivetrain

• Transmission 6-speed overdrive constant mesh
• Primary Drive Gear drive with torque compensator
• Final Drive Carbon fiber reinforced belt
• Suspension Front: Conventional telescopic fork, 46 mm fork tube; 5.1 in. (130 mm) travel

Rear:

Single, mono-tube gas shock, cast aluminum with rising rate linkage swingarm, air adjustable; 4.7 in. (120 mm) travel
Brakes/Wheels/Tires

• Brakes Front: Dual 300 mm floating rotor with 3-piston calipers
• Rear: 300 mm floating rotor with 2-piston caliper
• Tires Front: 130/70R18 Dunlop Elite 3
• Rear: 180/60R16 Dunlop Elite 3
• Rake 29°
• Trail 5.4 in. (137 mm)

Royal Enfield Bullet 500 Classic, 2009

Royal Enfield Bullet 500 Classic, 2009

USA Specifications
MSRP: $5,349 USD

 

 

Specification
Engine Four Stroke, OHV
Bore & Stroke 8.4 cm x 9.0 cm
Cubic Capacity 499 cc
Compression Ratio 8.5 to 1
Engine Output/Torque 23 BHP @ 5500 RPM
Electrical 12 volts
Ignition Electronic
Lubrication Dry Sump
Gear-Type
Clutch Multi-plate, Oil-immersed
Transmission 5 Speed, Constant Mesh
Gear Shift Lever-Operated
1 Down & 4 Up
Suspension - Front Telescopic Hydraulic
Suspension - Rear Twin Shock Absorbers

Brakes- Front Twin Lead - Drum 7”
Brakes- Rear Drum 6”
Pedal-operated (right side)
Tires - Front 3.25 x 19
Tires - Rear 3.50 x 19
Tank Capacity 3.8 gallons
Reserve 0.33 gallons
Fuel Consumption 75 mpg
Dimension - L x W x B 82.25 x 27.25 x 41.5 in
Wheel Base 53.5 inches
Ground Clearance 5.5 inches
Seat Height 30 inches
Maximum Speed 75 mph
Dry Weight 370 lbs